Epocel® Series Filter Elements product photo Primary L

Epocel® Series Filter Elements

Pleated, High Area Filter Cartridges for Long Service Life
  • Epoxy Impregnated Cellulosic Media with a Fixed Pore Construction Eliminates Unloading and Media Migration
  • Broad Chemical Compatibility
  • Recommended for Use with a Wide Range of Fluids and Gases Including Photographic Emulsions and Developer Chemicals, Lube Oil, Printing Inks, Air, Nitrogen, Ammonia and Natural Gas
  • Not Recommended for Food or Pharmaceutical Applications


Contact Us
* Required

Description

Pleated, High Area Filter Cartridges for Long Service Life
  • Epoxy Impregnated Cellulosic Media with a Fixed Pore Construction Eliminates Unloading and Media Migration
  • Broad Chemical Compatibility
  • Recommended for Use with a Wide Range of Fluids and Gases Including Photographic Emulsions and Developer Chemicals, Lube Oil, Printing Inks, Air, Nitrogen, Ammonia and Natural Gas
  • Not Recommended for Food or Pharmaceutical Applications

Specifications

Performance Specifications


Maximum Differential Pressure
Polypropylene Hardware:
 
80 psid (5.5 bard) @ 122ºF (50ºC)
45 psid (3.1 bard) @ 180ºF (82ºC) 
Stainless Steel Hardware: 75 psid (5.2 bard) @ 275ºF (135ºC)

Product Specifications


Materials of Construction:
Filter Media:  Epoxy Impregnated Cellulose
Hardware:  Polypropylene or 300 Series Stainless Steel 
Gaskets:  Buna N, fluorocarbon elastomer1 A, Ethylene Propylene 

Dimensions (nominal):
Industrial (1001 style):
Outside Diameter:  2 3/4" (70 mm)
Length:  10" (254 mm)
Configuration:   DOE with stainless steel hardware

UNI CAP Style:
Outside Diameter: 2 1/2" (64 mm)
Length:
 
10" (254 mm), 20" (508 mm),
30" (762 mm), 40" (1020 mm) 
Configuration:  DOE with polypropylene hardware 

Small Flow (4463 style): 
Outside Diameter:  2 1/4" (57 mm)
Length:  5 1/4" (133 mm)
Configuration: SOE with stainless steel hardware

Removal Ratings and Flow Specifications


 
Cartridge
Grade
Liquid
Service (µm)
98%
Efficiency2


100%
Efficiency3
Aqueous
Clean Pressure Drop4 per 10"
PSID per 1 GPM (mbard/lpm)
(UNI CAP & 1000 Style)
Gaseous
Service (µm)
98%
Efficiency


100%
Efficiency
           
EC 3 23 0.03 (0.55) 0.07 0.9
           
EE 10 30 0.02 (0.36) 1.5 5.0
           
EG 30 49 0.01 (0.18) 11 23
 













1 - Registered trademark of DuPont Dow.
2 - Nominal Filtration Rating:
    Pall ratings reflect a higher than average 98% removal by weight.
3 - Absolute Filtration Rating:
   The diameter of the largest hard spherical particle that will pass through a filter under specified test conditions.
   This is an indication of the largest opening in the filter element.
4 - Pressure drop in psi per gpm water for a single 10" (254 mm) module. Multiply this value by the required flow to
   determine the total aqueous pressure drop. For fluids other than water, multiply differential pressure by viscosity (cP).
   If this calculated pressure drop is excessive, then divide this value by the number of 10" modules required to reduce
   this pressure drop to an acceptable level.


Housing Information

Housings are available in polypropylene, carbon steel, or
stainless steel and can accommodate one to 356 10" modules
per housing. Contact Pall for further details.


 
 

Type

Filter Cartridges

Ordering Information

Part Numbers/Ordering Information


Element Part Number
UNI CAP Style:                  PUY    
Industrial 1001 Style:      MCS 1001
Small Flow 4463 Style:   MCS 4463 EC

 
Code
Cartridge Lengths
(nominal)
   
1 10"
   
2 20"
   
3 30"
   
4 40"
 














 
Code
Cartridge Grade
   
EC EC
   
EE EE
   
EG EG
 












 
Code
Gasket Option
   
H13 Buna N
(Standard for 1001 Style)
   
H fluorocarbon elastomer A
   
J Ethylene Propylene
(Standard for UNI CAP Style)
 

 

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.