Vector™ High Flow Series Filter Cartridges product photo Primary L

Vector™ High Flow Series Filter Cartridges

For coarse large volume particle filtration

The Vector High Flow filter cartridge utilizes Pall’s unique “Laid-Over-Pleat” or Ultipleat® technology with felt media to extend on-stream service life to your process applications. Vector High Flow elements are available in 20, 40, 60, and 80 inch lengths with media and hardware configurations that allow for broad temperature and chemical compatibility. Additionally, Vector High Flow elements offer the opportunity to employ Pall’s Ultipleat technology and system solution resources in coarse high flow applications.

Features and Benefits

  • Coreless large diameter cartridge
  • Available in both polypropylene and polyester felt media
  • High flow rate per filter cartridge
  • Up to 2x service life vs. comparable coarse large-volume filter elements
  • Available in a variety of filter lengths and grades
  • Features proprietary unique crescent-shaped pleat geometry
  • Inside-to-outside flow pattern that traps contaminants inside the element thus preventing polluting the treated process liquid or gas during cartridge change-out
  • Handle for easy cartridge replacement


Contact Us
* Required

Order Products

Description

For coarse large volume particle filtration

The Vector High Flow filter cartridge utilizes Pall’s unique “Laid-Over-Pleat” or Ultipleat® technology with felt media to extend on-stream service life to your process applications. Vector High Flow elements are available in 20, 40, 60, and 80 inch lengths with media and hardware configurations that allow for broad temperature and chemical compatibility. Additionally, Vector High Flow elements offer the opportunity to employ Pall’s Ultipleat technology and system solution resources in coarse high flow applications.

Features and Benefits

  • Coreless large diameter cartridge
  • Available in both polypropylene and polyester felt media
  • High flow rate per filter cartridge
  • Up to 2x service life vs. comparable coarse large-volume filter elements
  • Available in a variety of filter lengths and grades
  • Features proprietary unique crescent-shaped pleat geometry
  • Inside-to-outside flow pattern that traps contaminants inside the element thus preventing polluting the treated process liquid or gas during cartridge change-out
  • Handle for easy cartridge replacement

Specifications

Performance Specifications

Filter grades

1, 5, 10, 25, 50, 100 μm

Maximum differential pressure

5.2 bard (75 psid) @ 20°C (68°F)
2.4 bard (35 psid) @ 74°C (165°F)

Maximum operating temperature1

82°C (180°F) with typical polypropylene configuration
100°C (212°F) with typical polyester configuration2


Product Specifications

Materials of construction

Filter media: Polyester, polypropylene
Hardware: Polypropylene, acetal
O-rings: EPDM, fluoropolymer elastomer,
silicone, Buna N, teflon encapsulated
fluoropolymer elastomer
U-cup seals: Buna N, silicone, fluoropolymer
elastomer, Nordel3

Dimensions (nominal)

Outside Diameter: 152 mm (6 in)
Lengths: 508 mm (20 in), 1016 mm (40 in),
1524 mm (60 in), 2032 mm (80 in)
1 With compatible fluids.
2 The maximum operating temperature should not exceed 60°C (140°F) when using polyester media in aqueous solutions.
3 Nordel is a trademark of The Dow Chemical Company.

Applications

Typical Applications

  • Oil & Gas: condensate feed, gas filtration, natural gas transportation pipeline, wastewater filtration, frac water disposal, produced water, general disposal well protection, diesel, gasoline, kerosene, LPG final product filtration, hydrotreater feed filter, amine loop filter
  • Chemicals: epoxy resin, disposal wells, feed streams, industrial resins and coatings, agricultural chemicals, acids, alkalis, solvents, silicone solutions, water treatment, final product, tank car loading and unloading
  • Pulp & Paper: white liquor, black liquor, demin water, shower press, bleach tower processed water treatment
  • Paint/Automotive: paint feedstocks, intermediates, final products

Type

Large Format Filters

Ordering Information

Pall Part Number = HFV 6 [1] [2] [3] [4] [5]

Table 1

 
Code Cartridge lengths
(mm/in)
20 508/20
40 1016/40
60 1524/60
80 2032/80
 

Table 2

 
Code Media type
PP Polypropylene
PE Polyester
 

Table 3

 
Code Filter grades (μm)
001 1
005 5
010 10
025 25
050 50
100 100
 

Table 4

 
Code Hardware
P White polypropylene
A Acetal caps
 

Table 5

 
Code Sealing material
(O-ring /U-cup)
J Nordel /EPDM O-ring
H Fluoropolymer elastomer O-ring
H4 Silicone O-ring
H13 Buna N O-ring
H1 Teflon encapsulated fluoropolymer elastomer O-ring
H13U Buna N U-cup
H4U Silicone U-cup
HU Fluoropolymer elastomer U-cup
JU Nordel /EPDM U-cup
 

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.