FBT Series Filter Housings - 8 Round product photo Primary L

FBT Series Filter Housings - 8 Round

Specifically Designed for Liquid Filtration

FBT Series sanitary housings are designed specifically for liquid filtration in the food and beverage industry1.

  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance

FBT Housings are available in a standard sanitary design allowing a variety of connection options, or in a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and Benefits

  • T-style multi-round housing
  • Suitable for flow rates up to 820 liters/min (216 USgpm) depending upon cartridge type and size
  • Suitable for CIP and SIP
  • Beveled housing tubesheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • New cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

    FBT Series Filter Housings - 8 Round New cartridge locking design 
  • Operator-friendly V-Band housing closure simplifies handling
  • Housings with clamp coupling and butt weld connection options meet the design requirements of 3-A Sanitary Standards #10-04
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2


Contact Us
* Required

Order Products

Description

Specifically Designed for Liquid Filtration

FBT Series sanitary housings are designed specifically for liquid filtration in the food and beverage industry1.

  • Enhanced cleanability and microbiological safety due to crevice-free, polished and hygienic design
  • Corrosion resistance and durability with 316L stainless steel wetted parts and high-quality welds
  • Cost-effective without sacrificing quality and performance

FBT Housings are available in a standard sanitary design allowing a variety of connection options, or in a 3-A sanitary design, which meets the requirements of 3-A Sanitary Standards #10-04.

Features and Benefits

  • T-style multi-round housing
  • Suitable for flow rates up to 820 liters/min (216 USgpm) depending upon cartridge type and size
  • Suitable for CIP and SIP
  • Beveled housing tubesheet and aseptic-style housing seal provides enhanced drainability and a crevice-free connection between the housing head and bowl
  • Electropolished head and elbows and mirror polished bowl ensures optimal cleanability in critical areas while maintaining cost-effectiveness
  • New cartridge locking design features additional cut-outs to traditional half-moon portions of the Code 7 bayonet locks, enhancing cleanability and drainability

    FBT Series Filter Housings - 8 Round New cartridge locking design 
  • Operator-friendly V-Band housing closure simplifies handling
  • Housings with clamp coupling and butt weld connection options meet the design requirements of 3-A Sanitary Standards #10-04
  • Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC, ATEX 94/9/EC Group II Category 2

Specifications

Minimum / Maximum Operating Pressure2

  • -1 to 10 bar (-14.5 to 150 psig)

Minimum / Maximum Operating Temperature3, 5

  • Fluorocarbon Elastomer and Silicone seals -10 to 150 °C (14 to 300 °F)
  • EPR seals -10 to 121 °C (14 to 250 °F)

Steam Sterilization3, 5

  • Fluorocarbon Elastomer and Silicone seals 3.7 bar / 150 °C max (53 psig / 300 °F)
  • EPR seals 1 bar / 121 °C max (14.5 psig / 250 °F)

Materials of Construction

  • Wetted parts 316L stainless steel

Housing Seal Options1, 4

  • Fluorocarbon Elastomer
  • Silicone
  • EPR

Surface Finish

  • <0.8 micron Ra (<32 Ra microinches)

Connections

  • DIN 11851
  • Clamp Coupling
  • Butt Weld

Filter CartridgeCompatibility5

  • Pall Code 2 or Code 7 single open-end

Design Specification

  • Design capability of 4 times maximum operating pressure. Each housing is hydrostatically tested to 1.6 times maximum

FBT08 and FBT08 3-A Series Housings Nominal Dimensions in mm (inches)

 
Code Cartridge Height A B C - Element Removal D - DIN Connection D - Clamp Connection D - Butt Weld Connection
10 254 (10) 928 (36.5) 638 (25.1) 310 (12.2) 476.5 (18.8) 476.5 (18.8) 420.5 (16.6)
20 508 (20) 1178 (46.4) 888 (35.0) 560 (22.0) 476.5 (18.8) 476.5 (18.8) 420.5 (16.6)
30 762 (30) 1428 (56.2) 1138 (44.8) 810 (31.9) 476.5 (18.8) 476.5 (18.8) 420.5 (16.6)
40 1016 (40) 1678 (66.1) 1388 (54.6) 1060 (41.7) 476.5 (18.8) 476.5 (18.8) 420.5 (16.6)
 
For specific dimensions, please contact Pall

FBT08 Standard Housing
FBT08 Standard Housing e.g. Part No. FBT08*G47H4

FBT08 3-A Housing - Part No. FBT08*G47H4
FBT08 3-A Series Housing e.g. Part No. FBT08*G47H43A

Typical Water Flow / Pressure Drop Characteristics6


FBT Series Filter Housings - 8 Round Typical Water Flow / Pressure Drop Characteristics 

Volume and Weight

 
Code Volume L (US Gal) Weight kg (lb)
10 17.3 (4.6) 39 (86)
20 31.3 (8.3 44 (97)
30 45.3 (12.0) 49 (108)
40 59.3 (15.7) 54 (119)
 

1Please contact Pall to ensure the products meet specific National Legislation and/or Regional Regulatory requirements for food contact use.
2Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and seal used. For compatibility details, please contact Pall.
3For applications involving fluids below 0 °C (32 °F), please contact Pall.
4Check local pressure vessel code requirements.
5Refer to Pall Food and Beverage filter cartridge literature for additional guidelines on use.

Type

Housings, Vessels, or Assemblies

Ordering Information

This is a guide to the part numbering structure and possible options only. For availability of specific options, please contact Pall.

Example Part Number: FBT 08 1 G NW50 H4 (See bold references in tables below.)

Part Number: FBT 08<Cartridge Height Code from Table 1> G <Inlet/Outlet Code from Table 2><Housing Seal Option from Table 3> <Housing Design Code from Table 4>

Table 1 - Cartridge Height

 
Code Cartridge Height
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
4 1016 mm (40 in.)
 

Table 2 - Inlet/Outlet

 
Code Inlet / Outlet Vent Drain
NW80 NW80 DIN 11851 NW25 DIN 11851 NW25 DIN 11851
47 3" Clamp Coupling 1" Clamp Coupling 1" Clamp Coupling
99 Butt Weld 76.2 x 1.6 Butt Weld 25.4 x 1.6 Butt Weld 12.7 x 1.6
 

Table 3 - Housing Seal

 
Code Housing Seal Options
H Fluorocarbon Elastomer
H4 Silicone
J EPR
 

Table 4 - Housing Design

 
Code Housing Design
Blank Standard
3A 3-A Series
 

Note: Housings with clamp coupling and butt weld connection options are available in both Standard and 3-A Series design. Housings with DIN connections are only available in Standard design.

Spare Parts




 
Description Quantity Material Part No.
Bowl seal [2] 1 H ORHPW-684
Bowl seal [2] 1 H4 ORH4PW-684
Bowl seal [2] 1 J ORJPW-684
3" Clamp seal [4] 2 H LS00108
3" Clamp seal [4] 2 H4 LS00102
3" Clamp seal [4] 2 J LS00103
Retaining plate [3] 1 316L s/s ACS0974AM
Bowl clamp (std) [1] 1 304 s/s ACS0972DM
Bowl clamp [1]  (3-A Series) 1 304 s/s ACS0977DS
3" V-clamp [5] (std and 3-A Series) 2 304 s/s ACS0973DM
 

Optional Accessories


FBT Series Filter Housings Optional Accessories
Accessories pictured are shown in DIN 11851 option.

 
Description Connections Seal Material Part Number Connections Seal Material Part Number
Vent Kit - Gauge NW25
(DIN 11851)
H
H4
J
ACS0949AM
ACS0950AU
ACS0951AM
1" Clamp Coupling H
H4
J
ACS0958AM
ACS0959AU
ACS0960AM
Vent Kit -Stäubli* - Vent Valve NW25
(DIN 11851)
H
H4
J
ACS0952AM
ACS0953AU
ACS0954AM
1" Clamp Coupling H
H4
J
ACS0961AM
ACS0962AU
ACS0963AM
Vent Kit - Stäubli* Vent Tee NW25
(DIN 11851)
H
H4
J
ACS0946AM
ACS0947AU
ACS0948AM
1" Clamp Coupling H
H4
J
ACS0955AM
ACS0956AU
ACS0957AM
Drain Kit -Hosetail Valve (2 required per housing) NW25
(DIN 11851)
H
H4
J
ACS0981CM
ACS0982CU
ACS0983CX
1" Clamp Coupling H
H4
J
ACS0978CM
ACS0979CU
ACS0980CX
 

Connection kits are supplied either with DIN 11851 connection type or clamp coupling type. Please choose the desired option. Seal material options are H (Fluorocarbon Elastomer), H4 (Silicone) and J (EPR).

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.