SUPRApak M Series-SA Filter Systems product photo Primary L

SUPRApak M Series-SA Filter Systems

SUPRApak M Series-SA filtration units are turn-key systems designed for use with SUPRApak M filter modules, to handle medium batch sizes in wine, distilled spirits, sweeteners, gelatin, enzymes, and other food and beverage applications.

SUPRApak M filtration units provide a closed system approach to high capacity depth filtration, maximizing product protection and minimizing product losses. They are a cost-effective alternative to traditional sheet filtration and lenticular module filtration.

SUPRApak M Series-SA units provide a complete installation package including standard accessories, which allows quick integration into an existing system. They hold from one to four SUPRApak M modules, representing up to approximately 11 m2 (116.6 ft2) of filtration area in a very compact and low hold-up volume design. They are available either in single dome or flexible modular design.

 
Features Benefits
Closed filtration system • Increased process safety and product quality; no drip losses; minimum operator exposure to process fluids
Installation package with standard accessories • Turn-key installation allows quick integration into existing system
Compact design with high filtration area • High throughput filtration for medium batch production, resulting in low investment cost
Drainable, low holdup volume assembly • Higher product yield; minimized cleaning costs
High quality internal surface finish, sanitary and crevice-free design • Enhanced cleanability
Modular construction available • Enables flexibility and matching of production volumes to equipment capacity
External tensioning device with preset torque limit • Provides secure operation without bypass
Simple, quick installation and servicing • Reduced labor and maintenance costs; reduced process downtime
Filter module lifting device available on request • Eases filter installation and removal
ATEX (94/9/EC) Group II, Category 2 documentation (Zones 1/21 and 2/22) • Suitable for use in potentially explosive environments
 


Contact Us
* Required

Description

SUPRApak M Series-SA filtration units are turn-key systems designed for use with SUPRApak M filter modules, to handle medium batch sizes in wine, distilled spirits, sweeteners, gelatin, enzymes, and other food and beverage applications.

SUPRApak M filtration units provide a closed system approach to high capacity depth filtration, maximizing product protection and minimizing product losses. They are a cost-effective alternative to traditional sheet filtration and lenticular module filtration.

SUPRApak M Series-SA units provide a complete installation package including standard accessories, which allows quick integration into an existing system. They hold from one to four SUPRApak M modules, representing up to approximately 11 m2 (116.6 ft2) of filtration area in a very compact and low hold-up volume design. They are available either in single dome or flexible modular design.

 
Features Benefits
Closed filtration system • Increased process safety and product quality; no drip losses; minimum operator exposure to process fluids
Installation package with standard accessories • Turn-key installation allows quick integration into existing system
Compact design with high filtration area • High throughput filtration for medium batch production, resulting in low investment cost
Drainable, low holdup volume assembly • Higher product yield; minimized cleaning costs
High quality internal surface finish, sanitary and crevice-free design • Enhanced cleanability
Modular construction available • Enables flexibility and matching of production volumes to equipment capacity
External tensioning device with preset torque limit • Provides secure operation without bypass
Simple, quick installation and servicing • Reduced labor and maintenance costs; reduced process downtime
Filter module lifting device available on request • Eases filter installation and removal
ATEX (94/9/EC) Group II, Category 2 documentation (Zones 1/21 and 2/22) • Suitable for use in potentially explosive environments
 

Specifications

 
Minimum/Maximum Design Pressure 1, 2 -1 to 8 barg (-14.5 to 116 psig)
Minimum/Maximum Design Temperature1 -10 to 150 °C (14 to 302 °F)
Materials of Construction Wetted parts 1.4404 (AISI 316L stainless steel)
Sealing Materials3 EPDM elastomer
Internal Surface Finish Housing ≦ 0.8 micrometers Ra
( ≦ 32 Ra microinches ), electropolished
Piping ≦0.8 micrometers Ra ( ≦ 32 Ra microinches )
Internal Welds Housing Dressed and blended to provide uniform ripple- and crevice-free surface to ≦ 0.8 micrometers Ra (≦ 32 Ra microinches), electropolished
Piping Weld finish is as welded with a uniform crevice-free profile. ≦1.6 micrometers Ra (≦ 63 Ra microinches), pickled and passivated or bright annealed
Connections Inlet/Outlet DN40 (DIN 11851)
1.5 inch ISO 2852 clamp coupling compatible adaptors available by specific order
Feed Fluid Vent DN6 (8 mm / 0.31 inch OD) hose tail
Filtrate Vent (optional) DN6 (8 mm / 0.31 inch OD) hose tail
Drains DN15 (18 mm / 0.71 inch OD) hose tail
Filter Module Compatibility4 SUPRApak M series modules
 

1
Maximum design pressure and temperature ratings are vessel ratings only. Safe operation will also depend on filter module and housing gasket use. EPDM assembly seals restrict continuous operating temperature to 130 °C (266 °F). For details on filter module temperature limitations, please refer to SUPRApak module literature.
2
Design satisfies EC Pressure Equipment Directive (PED) 97/23/EC (Fluid Group 2, Category II, Module A1). Pressure rating is for liquid or gas. The PED category and fluid group classification indicates suitability of housing use on distilled spirits less than 70% by weight absolute alcohol. For such applications, the maximum allowable temperature must be below the flash point. For 70% by weight absolute alcohol the flashpoint is 21 °C (69.8 °F).
3
Seal materials meet requirements for food contact use as detailed in FDA 21 CFR Section 177.2600, and EC Regulation 1935/2004, including BfR XV and XXI. Please contact Pall for additional options.
4
Refer to Pall Food and Beverage SUPRApak module literature for additional guidelines on use.

SUPRApak M Series-SA systems are supplied with standard accessories, which include inlet and outlet butterfly valves, a safety device with drain assembly, a feed fluid vent assembly with pressure gauge, a downstream drain assembly with pressure gauge, and a downstream non-return valve. Additional optional selections are: sight glass on feed fluid vent, filtrate vent, and downstream sight glass.

Nominal Dimensions in mm (inches) —

for specific dimensions, please contact Pall 5

 
  M-100 M-200
M-210
M-300
M-311
M-320
M-400
M-421
A 1040 (40.9) 1299 (51.1) 1558 (61.3) 1818 (71.6)
B6,7 1001 (39.4) 1001 (39.4) 1001 (39.4) 1001 (39.4)
C6 513 (20.2) 513 (20.2) 513 (20.2) 513 (20.2)
D6,7 489 (19.3) 489 (19.3) 489 (19.3) 489 (19.3)
E8 359 (14.1) 359 (14.1) 359 (14.1) 359 (14.1)
F 324 (12.8) 324 (12.8) 324 (12.8) 324 (12.8)
 

5
Pall Corporation reserves the right to make dimensional modifications at any time, maintaining the same fit, form, and function. Please request a general arrangement drawing if exact dimensions are required.
6
Indicated dimensions are for installations requiring DIN connections. For installations requiring clamp coupling connections, an optional DIN-clamp coupling adaptor is additionally available. See Optional Accessories. If adaptors are added to the inlet and outlet connections, add 88 mm (3.5 in) for each adaptor.
7
An optional sight glass for the filtrate piping is available. See Optional Accessories. Installation of this sight glass will add 156 mm (6.1 in) to this dimension.
8
Adjustable (leg height adjustment)


 
  M-100 M-200 M-210 M-300 M-311 M-320 M-400 M-421
Volume L (US gal) 28.2 (7.5) 48.2 (12.7) 48.2 (12.7) 68.7 (18.2) 68.7 (18.2) 68.7 (18.2) 89.2 (23.6) 89.2 (23.6)
Weight kg (lb) 55.8 (123.0) 61.9 (136.5) 66.7 (147.1) 68 (149.9) 77.6 (171.1) 72.9 (160.7) 74.2 (163.6) 83.8 (184.8)
 

Standard Documentation9

  • Certificate of Conformity to Quality Standards
  • Final Inspection Certificate
  • Installation/Operating Manual (IOM)
9Additional documentation packages can be ordered. Please request PPD004BRONZ, PPD004SILVER, or PPD004GOLD.

Type

Housings, Vessels, or Assemblies

Ordering Information

Part Number: SPM SA [Table] TV NW40 A
Example Part Number: SPMSA421TVNW40A

Note: See bold reference code in the tables.

Table 1

 
Code Bowl Height and Configuration Number of SUPRApak Modules
100 1-High Bowl 1
210 2-High Split Bowl 1 or 2
421 4-High Split Bowl 1, 2, 3, or 4
 

Optional Accessories

 
Part No. Description Details
25590-022610 Hot Fluid Core 1.4404 (AISI 316L SS)
25590-0226-0110 Hot Fluid Core Extension Z1 1.4404 (AISI 316L SS)
25590-0226-0210 Hot Fluid Core Extension Z2 1.4404 (AISI 316L SS)
ACS1036AA Hook Spanner DN10-20 Tool
ACS1037AA Hook Spanner DN25-100 Tool
20040118-12 1-2 High Lifting Device Supplied with Spacer
20040118-34 3-4 High Lifting Device Supplied with Spacer
ACS1012AA Sight Glass DN40 For filtrate piping
ACS1020AA Sight Glass DN25 For feed fluid vent assembly
ACS1116AA Maintenance Tool Kit Hook spanners, adjustable torque wrench, torque unit tools
ACS1067GS Inlet/Outlet Adaptor (DN40 to 1 1/2 inch clamp coupling) Adaptor for piping adaption from DN to ISO 2852 clamp coupling connection
 

10
For hot fluid filtration (>40 °C/ >104 °F) select Hot Fluid Core for the top module in the stack and add Hot Fluid Core Extension Z1 (1-high section) and/or Hot Fluid Core Extension Z2 (2-high section) as required. A 1-high housing will only require the Hot Fluid Core.






Figure 5: Single and split bowl designs offer flexibility

Spare Parts

 
Part No. Description Details
ACS1004AM Housing Z1 Extension Kit Extension piece, closure clamp, o-ring
ACS1005AM Housing Z2 Extension Kit Extension piece, closure clamp, o-ring
ACS1006AM Housing Closure Clamp 1.4301 (AISI 304 SS)
ACS1007EM Housing O-Ring EPDM elastomer
ACS1008FA Pressure Gauge DN25 For feed fluid and filtrate piping
ACS1010CS Butterfly Valve DN40 For feed fluid and filtrate piping
ACS1012AA Sight Glass DN40 For filtrate piping
ACS1020AA Sight Glass DN25 For feed fluid vent assembly
ACS1014CM Non-Return Valve DN40 For filtrate piping
ACS1086EX Safety Valve DN25/32 For feed fluid piping
ACS1080EA DN40 Seal EPDM elastomer, for piping
ACS1087EX DN40 Seal Kit EPDM elastomer kit, for butterfly valves
ACS1051EA DN32 Seal EPDM elastomer, for safety valve
ACS1052EA DN25 Seal EPDM elastomer, for pressure gauges
ACS1081EA DN10 Seal EPDM elastomer, for piping to filtrate vent
ACS1083EA DN15 Seal Kit EPDM elastomer kit, for drain valves
ACS1082EA DN6 Seal Kit EPDM elastomer kit, for feed fluid and filtrate vent valves
ACS1040AA Torque Unit (vented) Torque unit with filtrate vent
ACS1106EX Torque Unit Rod Seal EPDM elastomer
ACS1042AA Torque Wrench Torque unit spare part
ACS1043AA Torque Unit Guide Bush Torque unit spare part
ACS1043AA Torque Unit Clamp Nut Torque unit spare part
KCA69045 Torque Unit Circlip Torque unit spare part
 

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.