Description
The Ultipleat PK CDA filter is designed for clean dry air and nitrogen applications in the LCD and semiconductor industries. It is rated for flows up to 10,000 SLPM (353 SCFM).
Product Features
Product Features
- Unique Ultipleat filter construction
- Single open-ended cartridge with o-ring seal
- High particle retention
- Exceptionally high flow rates
- Low differential pressure
- 100% integrity tested
Product Benefits
- Ultipleat filter construction allows for high-flows at the point-of-use (POU) where space is limited.
- Compact design enables efficient filter changeouts, thereby reducing equipment downtime.
Specifications
Materials
• Medium: PTFE
• Support: Polypropylene
• Cage and end caps: Polypropylene
• O-ring: EPR
Removal Rating
• ≥ 3 nm in gas service
Typical Filter Area
• 1.8 m2/19.4 ft2
Operating Conditions
Maximum operating temperature
• 50°C/122°F
Maximum differential pressure
• 0.41 MPa @ 20°C/60 psid @ 68°F
• 0.20 MPa @ 50°C/30 psid @ 122°F
• Medium: PTFE
• Support: Polypropylene
• Cage and end caps: Polypropylene
• O-ring: EPR
Removal Rating
• ≥ 3 nm in gas service
Typical Filter Area
• 1.8 m2/19.4 ft2
Operating Conditions
Maximum operating temperature
• 50°C/122°F
Maximum differential pressure
• 0.41 MPa @ 20°C/60 psid @ 68°F
• 0.20 MPa @ 50°C/30 psid @ 122°F
Dimensions
Performance
Pressure Drop vs. Air Flow Rate
Type
Filter Cartridges
Additional Information
Filter Housings
Ultipleat PK gas stainless steel filter housings are available in a wide variety of connection sizes and types, surface finishes, and code requirements to meet your specific needs. Please contact your local Pall representative to discuss the appropriate housing for your application.Ordering Information
| Part Number | Nominal Length | Seal |
| UPK510FGJU | 254 mm / 10 in. | EPR (U-cup) |
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
