Product Name	XpressKleen SWF Capsules	Ultipleat SP DR SWD Capsules
Membrane Materials	Surface modified PTFE	Highly Asymmetric PolyArylSulfone (HAPAS)
Hardware (Supports, Capsule)	PFA	HDPE
Removal Ratings	5 nm	10 nm       | 5 nm       | 2 nm
Filter Areas	0.3 m2 / 3.2 ft2	0.25 m2 / 2.7 ft2        | 0.2 m2 / 2.2 ft2
Configurations	U-flow	U-flow
Connections (Inlet / Outlet, Vent)	1/4”, Super Pillar2 300 P series (Nippon Pillar)
Maximum Operating Temperature	130 °C / 266 °F	60 °C / 140 °F
Maximum Operating Pressure	0.35 MPaG / 50 psig @ 40 °C / 104 °F 0.29 MPaG / 42 psig @ 60 °C / 140 °F 0.24 MPaG / 34 psig @ 80 °C / 176 °F 0.20 MPaG / 29 psig @ 95 °C / 203 °F 0.18 MPaG / 26 psig @ 110 °C / 230 °F 0.15 MPaG / 21 psig @ 130 °C / 266 °F	0.35 MPaG / 51 psig @ 38 °C / 100 °F 0.17 MPaG / 25 psig @ 60 °C / 140 °F
Maximum Forward Differential Pressure	0.20 MPaG / 29 psig @ 95 °C / 203 °F 0.15 MPaG / 21 psig @ 130 °C / 266 °F	0.1 MPaG / 15 psig @ 60 °C / 140 °F

² Pillar is a trademark of Nippon Pillar Packing Co.

Filter Capsules

Dimensions (nominal)

Typical Flow Characteristics - 1cP fluid, 20℃

XpressKleen SWF Capsules Ultipleat SP DR SWD Capsules

Part Numbers / Ordering Information

SW [1] 03 [2] 4E71 [3]

Table 1

Code	Capsule Format	Capsule Materials
D	SWD	HDPE
F	SWF	PFA

Table 2

Code	Removal Ratings	Media Materials	Capsule Format Availability
HSAH	2 nm	HAPAS	SWD
HSSH	5 nm	HAPAS	SWD
HSVH	10 nm	HAPAS	SWD
XP5	5 nm	PTFE	SWF

Table 3

Code	Prewet option	Applicable Capsule	Note
None	Standard with low extractables	SWF
-K18	Dry with low extractales	SWF	Nuts are not included in the box.
-K13C	Standard with low extractables	SWD
-K13D	Standard with low extractables for 2 nm only	SWD

Connections (Inlet/Outlet, Vent) : 1/4”, Super Pillar 300 P series (Nippon Pillar)