PCM500 Series Portable Cleanliness Monitor product photo Primary L

PCM500 Series Portable Cleanliness Monitor

The PCM500 Fluid Cleanliness Monitor is a portable diagnostic monitoring device that provides a measurement of system fluid cleanliness.

Like the Pall PCM400, the new improved PCM500 uses proven mesh Blockage technology to report accurate, reliable, 3 part ISO 4406 cleanliness codes for most types of fluids, in many types of environment.

With the PCM500 you can:

  • Monitor contamination levels in mineral, synthetic, or water based fluids. Results are unaffected by the presence of water, air, or dark fluids
  • Get accurate, 3 part ISO 4406 cleanliness code results in under 6 minutes and quickly take preventative action
  • Upload real-time results directly to mobile devices for analysis and action
  • 'Pass off' cleanliness of new builds quickly and confidently
  • Protect your systems from catastrophic failure by detecting abnormal fluid cleanliness conditions quickly

The PCM500 can be permanently installed to monitor critical applications (including component test facilities) or used as a portable device for routine condition monitoring of various fluid systems

PCM500 Monitor Features

  • Proven mesh blockage technology provides accurate 3-part*  ISO 4406, AS 4059 Table 1 (NAS 1638) or AS 4059 Table 2 cleanliness codes
  • Self cleaning procedure between each test ensures optimum accuracy of results
  • Compact, robust, fully self contained portable design (fluid sampling pump included)
  • Simple to use, color touch screen interface
  • Long battery life for extended operation in remote locations
  • Measurement of fluid cleanliness, temperature, viscosity, and optional water content.
* 3 part code measured at 4 µm, 6 µm and 14 µm (c) per ISO 16889.

For ordering and pricing information contact your local sales office or distributor Contact Us.



Contact Us
* Required

Description

The PCM500 Fluid Cleanliness Monitor is a portable diagnostic monitoring device that provides a measurement of system fluid cleanliness.

Like the Pall PCM400, the new improved PCM500 uses proven mesh Blockage technology to report accurate, reliable, 3 part ISO 4406 cleanliness codes for most types of fluids, in many types of environment.

With the PCM500 you can:

  • Monitor contamination levels in mineral, synthetic, or water based fluids. Results are unaffected by the presence of water, air, or dark fluids
  • Get accurate, 3 part ISO 4406 cleanliness code results in under 6 minutes and quickly take preventative action
  • Upload real-time results directly to mobile devices for analysis and action
  • 'Pass off' cleanliness of new builds quickly and confidently
  • Protect your systems from catastrophic failure by detecting abnormal fluid cleanliness conditions quickly

The PCM500 can be permanently installed to monitor critical applications (including component test facilities) or used as a portable device for routine condition monitoring of various fluid systems

PCM500 Monitor Features

  • Proven mesh blockage technology provides accurate 3-part*  ISO 4406, AS 4059 Table 1 (NAS 1638) or AS 4059 Table 2 cleanliness codes
  • Self cleaning procedure between each test ensures optimum accuracy of results
  • Compact, robust, fully self contained portable design (fluid sampling pump included)
  • Simple to use, color touch screen interface
  • Long battery life for extended operation in remote locations
  • Measurement of fluid cleanliness, temperature, viscosity, and optional water content.
* 3 part code measured at 4 µm, 6 µm and 14 µm (c) per ISO 16889.

For ordering and pricing information contact your local sales office or distributor Contact Us.

Specifications

 
 
Power supply: 90-260 VAC or integral 12 VDC
Lithium Ion battery
Battery life: Typically 35 samples
Temperature Range: 5 °C to 80 °C (41 °F to 176 °F)
(dependent on fluid type)
Compatibility: Water glycols, aqueous solutions.
Petroleum and synthetic oils (hydraulic lubricating, dielectric, etc.), fuels, industrial phosphate esters.
Seals: Fluorocarbon
Operating viscosity: 1.5 to 450 cSt (30 to 2,200 SUS)
Pressure: 0 to 315 bar (4570 psi) max
Monitoring Range: ISO 4406: <11/9/7 to 23/21/17
SAE AS 4059 Table 1
Class 1 to 12 (derived from NAS 1638)
SAE AS 4059 Table 2
>4 µm 1A to 12A, >6 µm 1B to
12B >14 µm 1C to 12C
Water in Oil % RH: ± 2% at 5 to 95% RH (PCM500W)
Accuracy: ± 1/2 ISO 4406 Code
Ports: Communication 3 x USB’s (Data Acquisition, PC Setup, Printer), RS232C (PLC Control)
Enclosure: IP 65 (NEMA 4)
Weight: 10.8 kg (23 lb)
with case: 21.6kg (47.62 lb)
Dimensions: PCM: 400 x 260 x 250 mm
(15.8 x 10.2 x 10 inches)
Case: 650 x 350 x 390 mm
(25.6 x 13.8 x 15.4 inches)
 

The PCM500 is supplied with the default language set to English. Other languages may be accessed via the HMI menu.
For operating manuals in all languages, visit www.pall.com.

Type

Diagnostic and Monitoring Equipment

Use

Monitoring

Ordering Information

This is a guide to the Part Numbering structure only, for specific options, please contact Pall.

PCM500 [TABLE 1] MA

Table 1: Water Sensor

 
Code Description
None No Water Sensor fitted
W Water Sensor fitted
 

Table 2: Connectors

 
Code Description
MA Fluid Inlet connections:b>
High Pressure: 1/4” BSP female swivel with metric, imperial or NPT test point connector
Low Pressure: 1/4” BSP Female swivel fitting
Power leads supplied covering UK, USA, Europe & Asia male plug formats
 

Printer Kit and Accessories

PCM500-PRTA

Important: The PCM500W model is fitted with a sensor to measure water content in oil and produce a % relative humidity or PPM value. Do not use this model of PCM500 with water based fluids or permanent damage will occur.



Wheeled carry case protects the PCM500 in transit

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.