The Seitz T Series Depth Filter Sheets were developed for coarse and clarifying filtration of many fluids in the food and beverage industry. The reduced density and high porosity media make this media suitable for filtration of viscous materials, retaining gel particles, or coarse dispersed substances at low differential pressures. Available in multiple formats.
From the selection and quality control of raw materials to the application of the latest production technologies, the T Series Filter Sheets meet the highest quality standards:
Homogenous and consistent media offer proven and reliable performance
An economic filtration with high particle holding capacity resulting in long filtration cycles and high throughputs
Each individual filter sheet is laser etched with the sheet grade, batch number and production date for full traceability
Read more +
Product images are a representation of product family for illustration purposes only. Actual products may vary.
Seitz T 120, Seitz T 500, Seitz T 750; Seitz T 950
Coarse filtration of rennet, coarse clarification of rapeseed and wheat germ oil and clarifying filtration of sugar syrup
Seitz T 1000, Seitz T 1500, Seitz T 2100, Seitz T 3500
Coarse filtration of natural extracts, coarse filtration of sugar syrup and coarse filtration of honey and edible oils
Seitz T 2600, Seitz T 5500
Sugar syrup clarification, barrel charr and particle removal in spirits and clarification of enzyme solutions
Specifications
Relative Retention Rating
1 Effective removal performance of filter sheets is dependent on process conditions.
Food Contact Compliance
Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.
Main Constituents
Seitz T 120, Seitz T 500, Seitz T 750; Seitz T 950, Seitz T 1000, Seitz T 1500, Seitz T 2100, Seitz T 3500: cellulose, perlite
Seitz T 2600, Seitz T 5500: cellulose
Characterization
Grade
Mass per Unit Area g/m2
Thickness mm
Ash %
Water Permeability2 L/m2/min (gal/ft2/min)
T 120
900
2.8
43
213 (5.3)
T 500
850
2.7
38
465 (11.6)
T 750
850
2.7
40
565 (14.1)
T 950
850
2.8
40
1,700 (42.5)
T 1000
950
3.6
35
3,400 (85)
T 1500
850
3.7
33
7,285 (182.1)
T 2100
700
3.3
15
10,200 (255)
T 2600
700
2.9
< 1
10,200 (255)
T 3500
888
4.6
15
12,750 (318.8)
T 5500
750
4.5
< 1
25,500 (637.5)
These figures have been determined in accordance with in-house test methods and the methods of the Technical /Analytical Work Group within the European Depth Filtration Association.
2The permeability was measured under test conditions with clean water at 20 °C (68 °F) and a Δp of 1 bar (14.5 psi).
Regeneration
T Series Filter Sheets may be rinsed with clean water (in the forward or reverse direction) to increase throughput and to optimize economic efficiency. Optimal regeneration of filter sheets installed in a plate and frame filter may be achieved with serial rinses of warm water followed by hot water. An example protocol is shown below.
Rinse with warm water (60 °C / 140 °F) for 15 minutes
Rinse with hot water (70 – 80 °C / 158 – 176 °F) for 8 – 10 minutes
The rinse flow rate should be equivalent to the filtration flow rate with a back pressure of 0.5 –1 bar (7.2 –14.5 psi).
Sterilization and Sanitization
Method
Temperature °C (°F)
Maximum Differential Pressure bar (psi)
Time3/ Cycle min
Steam
125 (257)
0.5 (7.2)
20
Hot Water
90 (194)
1 (14.5)
30
3The actual time required may vary as a function of the process conditions.
Filtration Guidelines
Please contact Pall for recommendations on your specific filtration process as results may vary by product, pre-filtration and filtration conditions.
For additional operating guidelines, including rinsing of sheets prior to use, please refer to instructions provided by Pall.
Quality
Filter sheets produced in a controlled environment
Manufactured according to ISO 9001:2015 certified Quality Management System
Before we get started with your quote, let us know your goods destination country so we can expedite the process.