Description
Airbus approved tool/solution that connects directly to the aircraft hydraulic system. It significantly reduces cost of replacing hydraulic fluid:
- Reduces fluid waste stream
- Reduces storage and disposal costs
- Reduces environmental impact
- Reduces man power and overall costs for fluid replacement
Aircraft hydraulic fluids (Skydrol1 and HyJet2) are susceptible to contamination by water, solid particles, chlorinated solvents and air. With the Pall HSPA purifier, contamination can be practically eliminated within a few hours.
Benefits of HSPA181 mobile purifier
The Pall HSPA purifier uses the principle of vacuum dehydration to remove 100 % of free water and as much as 90 % of dissolved water. It also removes 100 % of free and entrained gases and up to 80 % of dissolved gases. Particulate removal is achieved using a high performance (ß5(c)≥1000) filter element to polish the fluid before discharge back to the system reservoir.
- Automated operation.
- Existing hydraulic fluid in the system is purified - no draining, refilling, flushing necessary, saving time and money.
- No disposal problems, or impact on the environment.
- The Pall HSPA purifier is mobile and versatile - it operates where it is needed, when it is needed
- Integrated water sensor will provide real time data
- System provides 3000 psig hydraulic pressure to operate flight controls and even landing gears
The Pall HSPA purifier is linked to the aircraft hydraulic systems like a ground power unit and will save the operator money, time and ensure operation of aircraft without down time due to fluid contamination .
It supplements the Pall inline hydraulic filter elements that are installed in the pressure, return and case drain lines
This unit has provision to connect a PFC450 particle counter and contains suitable mounting position, electrical and hydraulic points for customer connection. The PFC450 is not supplied as standard with the HSPA181 purifier unit. For further details of the PFC450, please contact the Pall sales office
1 Skydrol is a trademark of Solutia Inc.
2 Hyjet is a trademark of Exxon Mobil Corporation
Specifications
Technical Data
| Dry weight | 710 kg (1565 lb) |
| Overall dimensions | Length (mm): 3000 maximum (with towbar extended) 1400 maximum (with towbar retracted) Width (mm): 1200 maximum Height (mm): 1750 maximum |
| Inlet connection | Snap-tite4 Series 72 QRC G1 |
| Outlet connection | Snap-tite Series 72 QRC G3/4 |
| Circulation flow rate | 0 - 32 L/min (0 - 8.45 US gpm) |
| Total motor power | 17.22 kW max (single phase) 17.16 kW max (3 phase) |
| Fluid compatibility | Compatible with petroleum based fluids, synthetic hydraulic fluids (including BMS3 - 11) rated for use with fluorocarbon or ethylene propylene seals (see Table 3 for seal options). |
| Maximum viscosity (at purifier) |
100 cSt |
| Fluid Temperature range | 10 °C to 60 °C (50 °F to 140 °F) |
| Ambient Service Temperature | 40 °C (104 °F) max |
| Max pressure for inlet | 4.5 bar g (65.3 psig) |
| Min pressure for inlet | 0.5 bar g (7.3 psig) |
| Max pressure for outlet | 207 bar g (3000 psig) |
| Normal operating vacuum | -0.8 bar g |
| Water removal | Pall HSPA purifiers remove free water, free gases, dissolved water (up to 90 %) and dissolved air (up to 80 %). |
Tool is available for different power requirements.
For existing HSPPA181 operators, spare parts list is below:
| SKU | Description | Drawing ID | Recommended Qty per purifier |
| QA06140 | Element | FL04 | 1 |
| PFS1001ZMH | Coalescer Element | FL10 | 1 |
| MCS1001CH100H | Carbon Element | FL09 | 1 |
| CG004222 | VACUUM PUMP 1-YEAR SERVICE KIT | 1 | |
| CG004221 | VACUUM PUMP OIL (5 ltr CONTAINER) | 1 | |
| CG04218 | VACUUM PUMP COALESCER ELEMENT | P03 | 1 |
| H9020SKJ | SEAL KIT | FL01 | 1 |
| HC9020EOT4JY923 | Inlet Filter Element | FL01 | 1 |
| QG0486 | Outlet Filter Element | FL05 | 1 |
| HC0293SEE5 | AIR BREATHER | FL03/FL06 | 2 |
| CG03771 | Oil Mist Seperator | FL02 | 1 |
Applications
HSPA181 Aerospace Approvals
- Airbus 415.170/94
- Airbus SIL 29-051
- Boeing 737-SL-29-50
- Boeing 747-SL-29-30
- Boeing SL-767-29-25
Type
Use
Ordering Information
If you have any technical questions or need a product demonstration, please talk to one of our experts Contact Aerospace.
The Pall HSPA181 portable purifier is available from the Airbus Tooling group - For price and availability, please contact our authorised distributor Satair or Airbus Tooling Group directly.
For Part Number ordering information, please see the product datasheet
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
