Description
Pall Advanta AVL series filter housings are L-flow pattern (in the side, out the bottom) sanitary stainless steel housings. They accommodate one single open-ended Code 7 filter cartridge of 5, 10, 20 or 30 inches (127 mm, 254 mm, 508 mm or 762 mm) nominal length. The Pall Advanta AVL series housings are used for either gas or liquid applications, and are designed to meet the stringent requirements of the BioPharmaceutical industry. These housings are commonly used for venting applications because of their convenient flow pattern and low pressure-loss.
Features
- Convenient L-flow pattern facilitates piping and solves many head-space limitations
- Low-point drain facilitates drainage of steam-condensate, product or CIP fluids
- Crevice-free internal surface finish of < 0.4 µm (< 15 µin.) Ra is ideal for sanitary applications
- Purpose-design enables inline steaming and integrity testing (by water intrusion — WIT — and forward flow)
- CE marking shows design-review to European Pressure Equipment Directive 97/23/EC (housings with volumes > 2.5 L)
- Every housing supplied with a quality certificate and manufactured to ATEXDirective 94/9/EC (Group ll Category 2)
- Variety of connection-styles, vents and drains offers choice and convenience
Specifications
Materials of Construction
- Wetted Parts: AISI 316L stainless steel
- V-band Clamp: AISI 316L and Nitronic1 60
- O-ring Seal: FDA-listed silicone (other elastomers also available)
- Surface Finish: Electropolished
Internal: Polished to 0.4 µm (15 µin.) Ra (typical)
External: Polished to 0.8µm (32 µin.) Ra (typical)
Inspection Documentation
- Certificate type 2.3 to EN10204
Operating Conditions
- Maximum Operating Pressure: -1 to 10 barg (-14.52 to 1503 psig)
- Maximum Operating Temperature:150 °C (300 °F)
Nominal Dimensions4
| Part Number | Overall Height | Clearance Required5 | Weight (Empty) | Volume |
| AVL105G23LABH4 | 364 mm (14.3 in.) | 150 mm (5.9 in.) | 2.5 kg (5.5 lbs) | 1.5 L (0.4 US gal) |
| AVL105G23LDDH4 | 364 mm (14.3 in.) | 150 mm (5.9 in.) | 2.5 kg (5.5 lbs) | 1.5 L (0.4 US gal) |
| AVL105G94ABH4 | 364 mm (14.3 in.) | 150 mm (5.9 in.) | 2.5 kg (5.5 lbs) | 1.5 L (0.4 US gal) |
| AVL105G94DDH4 | 364 mm (14.3 in.) | 150 mm (5.9 in.) | 2.5 kg (5.5 lbs) | 1.5 L (0.4 US gal) |
| AVL11G23LABH4 | 500 mm (19.7 in.) | 340 mm (13.4 in. | 3.0 kg (6.6 lbs) | 2.3 L (0.6 US gal) |
| AVL11G23LDDH4 | 500 mm (19.7 in.) | 340 mm (13.4 in. | 3.0 kg (6.6 lbs) | 2.3 L (0.6 US gal) |
| AVL11G94ABH4 | 500 mm (19.7 in.) | 340 mm (13.4 in. | 3.0 kg (6.6 lbs) | 2.3 L (0.6 US gal) |
| AVL11G94DDH4 | 500 mm (19.7 in.) | 340 mm (13.4 in. | 3.0 kg (6.6 lbs) | 2.3 L (0.6 US gal) |
| AVL12G23LABH4 | 751 mm (29.6 in.) | 590 mm (23.2 in.) | 3.9 kg (8.6 lbs) | 3.8 L (1.0 US gal) |
| AVL12G23LDDH4 | 751 mm (29.6 in.) | 590 mm (23.2 in.) | 3.9 kg (8.6 lbs) | 3.8 L (1.0 US gal) |
| AVL12G94ABH4 | 751 mm (29.6 in.) | 590 mm (23.2 in.) | 3.9 kg (8.6 lbs) | 3.8 L (1.0 US gal) |
| AVL12G94DDH4 | 751 mm (29.6 in.) | 590 mm (23.2 in.) | 3.9 kg (8.6 lbs) | 3.8 L (1.0 US gal) |
| AVL13G23LABH4 | 1025 mm (40.3 in.) | 840 mm (33.1 in.) | 4.8 kg (10.6 lbs) | 5.4 L (1.4 US gal) |
| AVL13G23LDDH4 | 1025 mm (40.3 in.) | 840 mm (33.1 in.) | 4.8 kg (10.6 lbs) | 5.4 L (1.4 US gal) |
| AVL13G94ABH4 | 1025 mm (40.3 in.) | 840 mm (33.1 in.) | 4.8 kg (10.6 lbs) | 5.4 L (1.4 US gal) |
| AVL13G94DDH4 | 1025 mm (40.3 in.) | 840 mm (33.1 in.) | 4.8 kg (10.6 lbs) | 5.4 L (1.4 US gal) |
Typical Air Flow Rates at 20 °C (68 °F)
Typical Liquid Flow Rates at 20 °C (68 °F)
1Nitronic is a registered trademark of Armco Inc.
2Full vacuum.
3With compatible fluids, which do not soften, swell or adversely affect the materials.
4All dimensions are nominal. Sales drawings showing +/- tolerances are available on request. Please contact your Pall representative or local distributor for current sales drawings.
5Suggested clearance is based on completely lifting the bowl over the top of an installed filter. Alternative methods of filter change-out allow operation with more limited “head-space”. Contact Pall for assistance
Type
Housings, Vessels, or Assemblies
Ordering Information
This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall. Example Part Number: AVL D 1 2 G 94 A D H4 (See bold references in tables below) Part Number: ALT < Design Code from Table 1 > 1 < Cartridge Code from Table 2 > G < Inlet/Outlet Code from Table 3 > < Vent Code from Table 4 > < Drain Code from Table 5 > H4
Table 1 - Design
| Code | Design |
| - | To European Pressure Equipment Directive |
| D | To European Pressure Equipment Directive with enhanced documentation including 3.1b stamped material and certification |
Table 2 - Cartridge Type
| Code | Cartridge Type |
| 05 | AB05 code 2 |
| 1 | AB1 code 7 |
| 2 | AB2 code 7 |
| 3 | AB3 code 7 |
Table 3 - Inlet/Outlet
| Code | Inlet and Outlet |
| 23L | 1 1/2 in. sanitary flange to ISO 2037/BS 4825 |
| 94 | 33.7 mm (1.33 in) O.D. x 2.0 mm (0.079 in.) wall butt weld to ISO 1127 |
Table 4 - Vent
| Code | Vent |
| A | Quick-connect and disconnect male connector (compatible with Stäubli* coupling) with valve |
| B | Valve with 8 mm (0.31 in.) hose barb |
| D | For 1⁄2 in. sanitary flange connection |
| N | No vent |
Table 5 - Drain
| Code | Drain |
| A | Quick-connect and disconnect male connector (compatible with Stäubli* coupling) with valve |
| B | Valve with 8 mm (0.31 in.) hose barb |
| D | For 1⁄2 in. sanitary flange to ISO 2037/BS 4825 |
| N | No drain |
Parts and Accessories
| Part Number | Description |
| ACS5098CM | Diaphragm valve kit for 1⁄2 in. sanitary flange connection. Compatible with 1⁄2 in. fractional sanitary flange connection. Includes clamp and gasket. |
| ACS0602EM | Valve seal kit (contains ten silicone O-rings and ten PTFE O-rings) |
| CC41608C00 | Valve stem |
| LY00381 | Valve knob cap |
| ACS0609DA | Closure clamp |
| ACS0428EX | EPR closure seal |
| ORH4P-238 | Silicone housing closure gasket |
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
