Oenoclear™ II Filter Cartridges product photo Primary L

Oenoclear™ II Filter Cartridges

A Regenerable Solution for Wine Pre-Filtration

The Oenoclear II filter cartridge is the latest development for yeast and colloid removal from wine.

The new Oenoclear II filter media is constructed from a unique liquid crystal polymer specifically noted for its thermal stability, high mechanical strength and good chemical compatibility. When configured into single open ended (SOE) AB style cartridges, the resulting filter allows for repeated regeneration and sanitization in situ for long service life.

The dense polymer matrix provides excellent yeast and colloid reduction making it ideal for wine tanker filling, final polish filtration in the cellar and protection of downstream membrane filters. When combined, the long service life and high removal efficiency enable low operating costs especially when compared to traditional “sterilizing grade” sheet filters.

 
Features Benefits
Liquid crystal polymer media
  • Negligible impact on wine characteristics
  • Wide range of chemical compatibility
  • Hot water sanitizable / steam sterilizable
Efficient yeast and colloid reduction
  • Improved protection of the final membrane filters
  • Low operating costs
Regenerable in situ
  • Long service life
  • Capability to switch between red and white wine
  • Simple cleaning
Fixed pore structure
  • Maintains performance with pulsed flow conditions
  • Consistent and reliable filterability index reduction
Enclosed assembly
  • Hygienic operation
  • Low hold up volume
  • Negligible product losses
 


Contact Us
* Required

Description

A Regenerable Solution for Wine Pre-Filtration

The Oenoclear II filter cartridge is the latest development for yeast and colloid removal from wine.

The new Oenoclear II filter media is constructed from a unique liquid crystal polymer specifically noted for its thermal stability, high mechanical strength and good chemical compatibility. When configured into single open ended (SOE) AB style cartridges, the resulting filter allows for repeated regeneration and sanitization in situ for long service life.

The dense polymer matrix provides excellent yeast and colloid reduction making it ideal for wine tanker filling, final polish filtration in the cellar and protection of downstream membrane filters. When combined, the long service life and high removal efficiency enable low operating costs especially when compared to traditional “sterilizing grade” sheet filters.

 
Features Benefits
Liquid crystal polymer media
  • Negligible impact on wine characteristics
  • Wide range of chemical compatibility
  • Hot water sanitizable / steam sterilizable
Efficient yeast and colloid reduction
  • Improved protection of the final membrane filters
  • Low operating costs
Regenerable in situ
  • Long service life
  • Capability to switch between red and white wine
  • Simple cleaning
Fixed pore structure
  • Maintains performance with pulsed flow conditions
  • Consistent and reliable filterability index reduction
Enclosed assembly
  • Hygienic operation
  • Low hold up volume
  • Negligible product losses
 

Specifications

Food Contact Compliance

  • Food contact compliant filters are available. Please consult the Declarations of Compliance for applicable part numbers at the links below.
  • Please refer to the Pall website foodandbev for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

Liquid Removal Rating1

  • Liquid removal rating: 0.8 micron @ 99.98 % Efficiency (β5000)

Materials of Construction

  • Filter Medium: Liquid crystal polymer on cellulose substrate
  • Support and Drainage: Polyester 
  • Cage, Core, Fin End and End Cap: Polypropylene
  • Adaptor: Polypropylene with internal stainless steel reinforcing ring
  • O-ring Seal: Ethylene propylene rubber or silicone elastomer

Operating Characteristics in Compatible Fluids2

 
Maximum Differential Pressure Operating Temperature
5.5 bard (80 psid) (forward) 50 °C (122 °F)
4.1 bard (60 psid) (forward) 80 °C (176 °F)
500 mbard (7 psid) (reverse) 20 °C (68 °F)
 

Sterilization and Sanitization

 
Media Temperature Cumulative Time3
Steam 121 °C (250 °F) 25 hours
Hot Water 90 °C (194 °F) 50 hours
Peroxyacetic acid based sanitizer (300 ppm total peroxides) 20 °C (68 °F) 50 hours
 

Typical Flow Rates4

Oenoclear II Filter Cartridges Typical Flow Rates 

1The Oenoclear II Filter Cartridge liquid retention rating is based on modified OSU-F2 test.
2Compatible fluids are defined as those which do not swell, soften or attack any of the filter components.
3Measured under laboratory test conditions. The actual cumulative time depends on the process conditions. Pall recommends the use of Code 7 adaptors to ensure filter sealing after cooling. Cartridges should be cooled to system operating temperature prior to use. Contact Pall for recommended procedures.
4Typical initial clean media ΔP 254 mm (10") cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508 mm, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.

Performance

Quality

  • Cartridges produced in a controlled environment 
  • Manufactured according to ISO 9001:2008 certified Quality Management System

Type

Filter Cartridges

Ordering Information

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: AB 1 ST 7 W H4 (See bold references in tables below)

Part Number: AB < Length Code from Table 1 > ST < Adaptor Code from Table 2 >W < O-ring Code from Table 3 >

Table 1 - Nominal Length
 
Code Description
1 254 mm (10 in.)
2 508 mm (20 in.)
3 762 mm (30 in.)
4 1016 mm (40 in.)
 

Table 2 - Adaptor
 
Code Description
3 SOE – single open end with flat closed end and external 222 O-rings
7 SOE – single open end with fin end and 226 external O-rings and locking tabs
8 SOE – single open end with fin end and external 222 O-rings
28 SOE – single open end with fin end and external 222 O-rings and locking tabs
 

Table 3 - O-ring Seal Material
 
Code Description
H4 Silicone
J Ethylene Propylene
 

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.