Description
Download data sheet pdf
Pall Aria™ AP-Series Water Treatment Systems are specifically designed to meet the drinking water treatment requirements of small communities. Pall Aria systems use uniquely designed Microza* membrane modules in a hollow fiber configuration to remove the following contaminants from surface and ground water sources:
- Turbidity
- Bacteria
- Cysts and Oocysts
- Iron and Manganese
- Arsenic
Each 0.1µm hollow fiber module provides high active surface area (538ft2 - 50m2). The hollow fiber modules in the Pall Aria system are highly permeable resulting in high water production rates.
Pall’s dedication to simplified process design and control logic has produced a family of systems that are characterized by:
- Full System NSF 61 Certification
- Long Service Life Hollow Fiber Membranes
- Operator Friendly Control Interface
- Simple Clean-In-Place Operation
- High Recovery
- Low Cost of Operation
- Easily Installed Modular Skids
- Compact System Footprint
- ISO 9000 Certified Manufacturing
- Optional Auxiliary Equipment
View of Hollow Fiber Membrane Module Cut-away.
* Microza is a trademark of Asahi Kasei Corporation.
Specifications
Contaminants | Typical Removal* |
---|---|
Giardia | > 6 log |
Cryptosporidium | > 6 log |
MS2 coliphage or bacteriophage | 0.5 - 3 log |
Turbidity | < 0.1 NTU |
*Based on third party testing
Pall Aria™ AP-Series System Specifications
Pall Aria AP-Series System Components
Standard system components consist of 1 to 60 membrane modules, a feed tank, one feed pump, one reverse filtration pump, manual on/off and automatic valving, filtrate flow meter, pressure and temperature sensors, and PLC control.
Pall Aria AP-Series System Operation
Maximum Inlet Pressure to Module: 45 psi (3 bar)
Maximum Operating Temperature: 104°F (40°C)
Pall Aria AP-Series System Specifications
Module Housing: PVC, ABS or other
Gasket: EPDM
Potting Material: Silicone and Epoxy or Urethane
Panel: NEMA 4
Tanks: Polyethylene
Piping: Lower Manifold and Air: Stainless Steel
(other piping: PVC)
Hollow Fiber Membrane: PVDF
Pumps: Horizontal Stainless Steel Centrifugal
System Service
Remote monitoring of system performance available as an online service. On-site service and maintenance contract also available.
Table 2: Standard Filtration Skid Specifications
Model Number | Maximum | Maximum Flow Rate (gpm [m3/hr]) | Footprint (L x W x H)(Feet) Installed |
---|---|---|---|
AP-1 | 2 | 3-25 [1-7] | 6 x 2.8 x 9.7 |
AP-2 | 8 | 10-50 [2.3-12] | 8 x 4.1 x 9.9 |
AP-3 | 10 | 25-175 [6-40] | 10 x 6.9 x 10.3 |
AP-3x | 20 | 25-175 [6-40] | (1) 22.9 x 5.7 x 10.8 |
AP-4 | 36 | 50-350 [15-80] | (1) 24 x 6.8 x 10.8 |
AP-6 | 60 | 200-700 [45-150] | (1) 27 x 17 x 10.8 |
1 Module Rack is off the skid. Other configurations allow variation in footprint.
Scope of Supply
Process Flow Diagram for the Pall Aria AP-Series Water Treatment System
Performance
Pall systems with Microza membrane modules have been approved for potable water supply. The Aria hollow fiber membrane system was the first to receive a “full system” certification in accordance with ANSI / NSF 61 Specifications.
Extensive testing has been done across the USA including:
- University of New Hampshire
- Croton Reservoir, NY
- Highland Reservoir, PA
- Meeteetse Reservoir, WY
- Oregon Parks Department
- North Slope Borough WTP, AK
- Youngs River, OR
- Stoney Creek, VA
- Westover, PA
- Caney, KS
- Kernville, CA
- Basalt, UT
- Crested Butte, CO
- Hobart, NY
Site testing confirmed Pall Aria Water Treatment Systems meet or exceed EPA standards for safe drinking water, such as the requirement of the Surface Water Treatment Rule (as amended December 16, 1998).
Type
Ordering Information
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.