PolyMicro® Filter Bags product photo Primary L

PolyMicro® Filter Bags

Features
  • Proprietary polypropylene, triple-layer construction adsorbs hydrocarbons from air, gas and aqueous streams for clearer results
  • Outer cover prevents fiber migration to reduce waste
  • Non-foaming microfiber offers product cleanliness, high performance and longer service life
  • High void volume means longer service life, higher contaminant loading and reduced waste loads
  • Easy change-out reduces down time
  • PolyLoc® ring creates a hermetic seal within a vessel housing to prevent liquid bypass
  • POMF1A, 2A, 10A & 25A are available with NSF Standard 61 Certification
  • Please refer to the Pall FSI QA Department for compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.


Contact Us
* Required

Description

Features
  • Proprietary polypropylene, triple-layer construction adsorbs hydrocarbons from air, gas and aqueous streams for clearer results
  • Outer cover prevents fiber migration to reduce waste
  • Non-foaming microfiber offers product cleanliness, high performance and longer service life
  • High void volume means longer service life, higher contaminant loading and reduced waste loads
  • Easy change-out reduces down time
  • PolyLoc® ring creates a hermetic seal within a vessel housing to prevent liquid bypass
  • POMF1A, 2A, 10A & 25A are available with NSF Standard 61 Certification
  • Please refer to the Pall FSI QA Department for compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

Specifications

 
POMF1A, 2A, 10A & 25A Available with NSF Standard 61 Certification
POMF 1A, 2A, 10A and 25A Bags are made from FDA-compliant materials (OA bags also include an additional layer of oil removing material)
Auto Construction (Seams on Inside)
Available Materials Polypropylene microfiber
Maximum Operating Temperature 160° F (93° C)
Suggested Differential Pressure 35 PSIG maximum — dirty
10-15 PSIG optimum change out
Micron Rating 1A: 1 micron
2A: 2 micron
10A: 10 micron
25A: 25 micron
50A: 50 micron
90A: 90 micron
120A: 120 micron
OA: Special purpose 25 micron
(includes an additional layer of oil removing material)
Sizes #1: 7” dia. x 16” long, 65 GPM
#2: 7” dia. x 32” long, 125 GPM
#3: 4” dia. x 8.25” long, 20 GPM
#4: 4” dia. x 14” long, 35 GPM
Available Rings (See chart on right for all available rings)
 

Type

Filter Bags

Chemical Compatibility

Key:

Recommended for most conditions up to the maximum temperature of the material. Recommended for most conditions up to the maximum temperature of the material.

Fair. May be acceptable, but testing is recommended. Fair. May be acceptable, but testing is recommended.

No data available. Customer testing required. No data available. Customer testing required.

Not recommended. Not recommended.

  • A
    • A
    • Recommended for most conditions up to the maximum temperature of the material. Acetaldehyde
    • Recommended for most conditions up to the maximum temperature of the material. Acetamide
    • Recommended for most conditions up to the maximum temperature of the material. Acetic Acid 100% (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Acetic Acid 5%
    • Recommended for most conditions up to the maximum temperature of the material. Acetic Acid 50%
    • Recommended for most conditions up to the maximum temperature of the material. Acetic Acid 80%
    • Recommended for most conditions up to the maximum temperature of the material. Acetic Anhydride
    • Recommended for most conditions up to the maximum temperature of the material. Acetone
    • Recommended for most conditions up to the maximum temperature of the material. Acetophenone
    • Fair. May be acceptable, but testing is recommended. Acetyl Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Acetylene
    • Recommended for most conditions up to the maximum temperature of the material. Acrylic Acid (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Acrylonitrile (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Adipic Acid
    • Recommended for most conditions up to the maximum temperature of the material. AirCompressed
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Acetate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Ammonium Sulfate
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Chloride 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Fluoride 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Hydroxide
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Nitrate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aluminum Sulfate (only up to 70°F)
    • No data available. Customer testing required. Amino Acids
    • Recommended for most conditions up to the maximum temperature of the material. Ammonia Gas (Dry) (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Bicarbonate (only up to 70°F)
    • No data available. Customer testing required. Ammonium Bromide 10%
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Carbonate 10% (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Chloride 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Fluoride 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Hydroxide 30% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Nitrate 5%
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Phosphate (only up to 140°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Sulfate 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ammonium Thiocyanate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Amyl Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Amyl Alcohol (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aniline (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aqua Regia (only up to 75°F)
    • Recommended for most conditions up to the maximum temperature of the material. Arsenic (only up to 150°F)
    • Fair. May be acceptable, but testing is recommended. Arsenic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Asphalt (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Aviation Fuel
  • B
    • B
    • Recommended for most conditions up to the maximum temperature of the material. Banana Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Barium Carbonate
    • Recommended for most conditions up to the maximum temperature of the material. Beer
    • Recommended for most conditions up to the maximum temperature of the material. Beet Sugar Liquors
    • Recommended for most conditions up to the maximum temperature of the material. Benzene
    • Recommended for most conditions up to the maximum temperature of the material. Brass Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Bromine (Dry) (only up to 70°F)
    • Not recommended. Bromine (Wet)
    • Recommended for most conditions up to the maximum temperature of the material. Bronze Cyanide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Butane
    • Recommended for most conditions up to the maximum temperature of the material. Butanoic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Butyl Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Butyl Alcohol
    • Recommended for most conditions up to the maximum temperature of the material. Butyl Cellosolve (only up to 70°F)
    • No data available. Customer testing required. Butyl Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Butylene (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Butyric Acid
  • C
    • C
    • Recommended for most conditions up to the maximum temperature of the material. Cadmium Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Cadmium Fluoborate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Calcium Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Calcium Hydroxide 5%
    • Recommended for most conditions up to the maximum temperature of the material. Calcium Hypochlorite
    • Recommended for most conditions up to the maximum temperature of the material. Cane Sugar Liquors
    • Recommended for most conditions up to the maximum temperature of the material. Carbolic Acid (Phenol) (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Carbon Dioxide (Dry)
    • Recommended for most conditions up to the maximum temperature of the material. Carbon Disulfide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Carbon Tetrachloride
    • Recommended for most conditions up to the maximum temperature of the material. Carbonated Water
    • Recommended for most conditions up to the maximum temperature of the material. Carbonic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Castor Oil
    • Recommended for most conditions up to the maximum temperature of the material. Caustic Potash
    • Recommended for most conditions up to the maximum temperature of the material. Caustic Soda
    • Recommended for most conditions up to the maximum temperature of the material. Cellosolve (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Chloracetic Acid (only up to 70°F)
    • Not recommended. Chlorine Gas (Dry)
    • Not recommended. Chlorine Gas (Wet)
    • Recommended for most conditions up to the maximum temperature of the material. Chlorobenzene (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Chloroform (Dry)
    • Recommended for most conditions up to the maximum temperature of the material. Chromic Acid (only up to 80°F)
    • Recommended for most conditions up to the maximum temperature of the material. Cider
    • Recommended for most conditions up to the maximum temperature of the material. Citric Acid
    • Not recommended. Cod Liver Oil
    • Not recommended. Coffee Extract
    • Recommended for most conditions up to the maximum temperature of the material. Cola Syrup (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Copper Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Copper Sulfate
    • Recommended for most conditions up to the maximum temperature of the material. Corn Oil
    • Recommended for most conditions up to the maximum temperature of the material. Cottonseed Oil
    • Recommended for most conditions up to the maximum temperature of the material. Creosol
    • Not recommended. Creosote
    • Recommended for most conditions up to the maximum temperature of the material. Cresylic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Cyclohexamine
    • Recommended for most conditions up to the maximum temperature of the material. Cyclohexane (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Cyclohexanol (only up to 150°F)
  • D
    • D
    • Fair. May be acceptable, but testing is recommended. DDT Solution
    • Recommended for most conditions up to the maximum temperature of the material. Dextrose
    • Recommended for most conditions up to the maximum temperature of the material. Diacetone Alcohol (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Dibutyl Phthalate (only up to 70°F)
    • Not recommended. Dichloroethane
    • Recommended for most conditions up to the maximum temperature of the material. Dichloroethylene (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Diesel Fuel
    • Recommended for most conditions up to the maximum temperature of the material. Diethanolamine
    • Recommended for most conditions up to the maximum temperature of the material. Diethylene Glycol
    • Recommended for most conditions up to the maximum temperature of the material. Dimethyl Formamide (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Diphenyl Oxide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Dowtherm (only up to 70°F)
  • E
    • E
    • Recommended for most conditions up to the maximum temperature of the material. Epichlorohydrin
    • Recommended for most conditions up to the maximum temperature of the material. Ethanol
    • Recommended for most conditions up to the maximum temperature of the material. Ethanolamine (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ether
    • Recommended for most conditions up to the maximum temperature of the material. Ethyl Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Ethyl Cellulose (only up to 70°F)
    • Not recommended. Ethyl Chloride (Dry)
    • Recommended for most conditions up to the maximum temperature of the material. Ethylene Diamine (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ethylene Glycol
    • Not recommended. Ethylene Oxide
  • F
    • F
    • Recommended for most conditions up to the maximum temperature of the material. Fatty Acids
    • Recommended for most conditions up to the maximum temperature of the material. Ferric Chloride (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ferric Chloride 1%
    • Recommended for most conditions up to the maximum temperature of the material. Ferric Nitrate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Ferric Sulfate 5%
    • Recommended for most conditions up to the maximum temperature of the material. Ferrous Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Fish Oils (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Flusilicic Acid (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Formaldehyde 10%
    • Recommended for most conditions up to the maximum temperature of the material. Formalin 40%
    • Recommended for most conditions up to the maximum temperature of the material. Formic Acid (Conc.)
    • Recommended for most conditions up to the maximum temperature of the material. Formic Acid (Dilute)
    • Recommended for most conditions up to the maximum temperature of the material. Freon 12 (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. Freon 22 (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. Fruit Juices (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Fuel Oils
    • Recommended for most conditions up to the maximum temperature of the material. Furfural (only up to 70°F)
  • G
    • G
    • Recommended for most conditions up to the maximum temperature of the material. GasNatural
    • Recommended for most conditions up to the maximum temperature of the material. GasolineAviation
    • Recommended for most conditions up to the maximum temperature of the material. GasolineMoter
    • Recommended for most conditions up to the maximum temperature of the material. GasolineSour (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Gelatin
    • Recommended for most conditions up to the maximum temperature of the material. Glucose
    • Recommended for most conditions up to the maximum temperature of the material. GlycerineGlycerol
    • Recommended for most conditions up to the maximum temperature of the material. Glycol
    • Recommended for most conditions up to the maximum temperature of the material. Glycol Monoether (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Gold Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Grease
    • Recommended for most conditions up to the maximum temperature of the material. Green Sulfate Liquor (only up to 70°F)
    • No data available. Customer testing required. Gum Arabic
  • H
    • H
    • Recommended for most conditions up to the maximum temperature of the material. Helium
    • Recommended for most conditions up to the maximum temperature of the material. Hexane
    • No data available. Customer testing required. Honey
    • Recommended for most conditions up to the maximum temperature of the material. Hydraulic OilPetroleum Base
    • Recommended for most conditions up to the maximum temperature of the material. Hydraulic OilPhosphate Ester
    • No data available. Customer testing required. Hydrazine
    • Recommended for most conditions up to the maximum temperature of the material. Hydrobromic Acid 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrobromic Acid 50% (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrochloric Acid 30%
    • Recommended for most conditions up to the maximum temperature of the material. Hydrochloric Acid 5%
    • Recommended for most conditions up to the maximum temperature of the material. Hydrocyanic Acid (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrocyanic Acid 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrofluoric Acid 10%
    • Recommended for most conditions up to the maximum temperature of the material. Hydrofluoric Acid 50% (only up to 70°F)
    • Fair. May be acceptable, but testing is recommended. Hydrogen Gas
    • Recommended for most conditions up to the maximum temperature of the material. Hydrogen Peroxide 30% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrogen Peroxide 5% (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrogen Sulfide (Dry) (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Hydrogen Sulfide (Wet)
    • Recommended for most conditions up to the maximum temperature of the material. Hydroquinone (only up to 70°F)
  • I
    • I
    • No data available. Customer testing required. Insulating Oil
    • Recommended for most conditions up to the maximum temperature of the material. Iodine
    • Recommended for most conditions up to the maximum temperature of the material. Iron Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Iron Sulfate (only up to 140°F)
    • No data available. Customer testing required. Isopropyl Acete
    • Recommended for most conditions up to the maximum temperature of the material. Isopropyl Alcohol
  • J
    • No Item in this section
  • K
    • K
    • Recommended for most conditions up to the maximum temperature of the material. Kerosene
    • Recommended for most conditions up to the maximum temperature of the material. Ketchup (only up to 70°F)
  • L
    • L
    • Recommended for most conditions up to the maximum temperature of the material. Lactic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Lard Oil
    • Recommended for most conditions up to the maximum temperature of the material. Latex (Natural) (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Lead Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Lead Alkali
    • Recommended for most conditions up to the maximum temperature of the material. Lead Fluoborate (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. LimeSulfur (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Linoleic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Linseed Oil
    • Recommended for most conditions up to the maximum temperature of the material. Lithium Bromide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Lithium Carbonate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Lithium Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Lithium Hydroxide
    • Recommended for most conditions up to the maximum temperature of the material. Lube Oil
    • Recommended for most conditions up to the maximum temperature of the material. Lye
  • M
    • M
    • Recommended for most conditions up to the maximum temperature of the material. Magnesium Chloride (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Magnesium Hydroxide
    • Recommended for most conditions up to the maximum temperature of the material. Magnesium Sulfate (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Mayonnaise (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Melamine Resins (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Mercuric Chloride 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Mercurous Nitrate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Mercury (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Methane (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Methyl Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Methyl Alcohol
    • Recommended for most conditions up to the maximum temperature of the material. Methyl Cellosolve (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Methyl Ethyl Ketone
    • Recommended for most conditions up to the maximum temperature of the material. Methylene Chloride (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. Milk
    • Recommended for most conditions up to the maximum temperature of the material. Mineral Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Molasses (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Monoethanolamine (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Mustard (only up to 70°F)
  • N
    • N
    • Recommended for most conditions up to the maximum temperature of the material. Naptha (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Napthalene (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nickel Bright Chloride (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nickel Chloride (only up to 70°F)
    • No data available. Customer testing required. Nickel Dull Chloride
    • Recommended for most conditions up to the maximum temperature of the material. Nickel Dull Fluoborate (only up to 170°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nickel Sulfate
    • Recommended for most conditions up to the maximum temperature of the material. Nitric Acid 10% (only up to 210°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nitric Acid 20% (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nitric Acid 50% (only up to 70°F)
    • Not recommended. Nitric Acid Fuming
    • Recommended for most conditions up to the maximum temperature of the material. Nitrobenzene (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nitrobenzene 10% (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Nitrogen
    • No data available. Customer testing required. Nitrous Oxide
  • O
    • O
    • Recommended for most conditions up to the maximum temperature of the material. Oil, Crude
    • Recommended for most conditions up to the maximum temperature of the material. Oleic Acid (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Oleic Acid 5% (only up to 180°F)
    • Not recommended. Oleum
    • Recommended for most conditions up to the maximum temperature of the material. Olive Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Oxalic Acid 5% (only up to 180°F)
  • P
    • P
    • Recommended for most conditions up to the maximum temperature of the material. Palm Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Pentane
    • Recommended for most conditions up to the maximum temperature of the material. Perchloroethylene (Dry) (only up to 200°F)
    • Recommended for most conditions up to the maximum temperature of the material. Petroleum Ether
    • Recommended for most conditions up to the maximum temperature of the material. Petroleum OilRefined
    • Recommended for most conditions up to the maximum temperature of the material. Petroleum OilSour
    • Recommended for most conditions up to the maximum temperature of the material. Phenol (only up to 190°F)
    • No data available. Customer testing required. PhenolFormaldehyde Resin
    • Recommended for most conditions up to the maximum temperature of the material. Phosphoric Acid 1%
    • Recommended for most conditions up to the maximum temperature of the material. Phosphoric Acid 10% (only up to 210°F)
    • Recommended for most conditions up to the maximum temperature of the material. Phosphoric Acid 50% (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Phosphoric Acid 80% (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Pine Oil (only up to 70°F)
    • No data available. Customer testing required. Plating Solutions
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Acetate 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Bisulfate 10%
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Carbonate 10%
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Chloride 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Chromate 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Cyanide 5%
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Ferrocyanide 10% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Permanganate 5% (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Potassium Sulfate 5% (only up to 120°F)
    • Recommended for most conditions up to the maximum temperature of the material. Propane (only up to 250°F)
    • Recommended for most conditions up to the maximum temperature of the material. Propionic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Propylene Glycol (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Propylene Oxide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Pyridene
  • Q
    • No Item in this section
  • R
    • No Item in this section
  • S
    • S
    • Recommended for most conditions up to the maximum temperature of the material. Sea Water
    • Recommended for most conditions up to the maximum temperature of the material. Shellac (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Silver (only up to 80°F)
    • Recommended for most conditions up to the maximum temperature of the material. Silver Nitrate
    • Recommended for most conditions up to the maximum temperature of the material. Soda Ash
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Acetate
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Bicarbonate
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Bisulfate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Bisulfite
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Borate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Carbonate
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Chlorate (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Chloride 10%
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Fluoride 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Hydroxide 20%
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Hydroxide 40%
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Hydroxide 5%
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Hypochlorite 5% (only up to 120°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Metaphosphate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Nitrate 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Perborate 1% (only up to 160°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Peroxide (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Phosphate
    • No data available. Customer testing required. Sodium Polysulfide
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Silicate (only up to 180°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Sulfate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Sulfide
    • Recommended for most conditions up to the maximum temperature of the material. Sodium Thiosulfate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Soybean Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Stannic Chloride 5%
    • Recommended for most conditions up to the maximum temperature of the material. Stannous Chloride 5% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Starch
    • Recommended for most conditions up to the maximum temperature of the material. Steacates
    • Recommended for most conditions up to the maximum temperature of the material. Steam (only up to 220°F)
    • Recommended for most conditions up to the maximum temperature of the material. Stearic Acid
    • Recommended for most conditions up to the maximum temperature of the material. Stoddard Solvent (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sucrose Solutions
    • Recommended for most conditions up to the maximum temperature of the material. Sulfate Liquors (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sulfur Dioxide (Dry)
    • Recommended for most conditions up to the maximum temperature of the material. Sulfur Trioxide (Dry)
    • Recommended for most conditions up to the maximum temperature of the material. Sulfuric Acid 5%
    • Recommended for most conditions up to the maximum temperature of the material. Sulfuric Acid 50% (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Sulfuric Acid 96% (only up to 70°F)
    • Not recommended. Sulfuric Acid Fuming
    • Recommended for most conditions up to the maximum temperature of the material. Sulfurous Acid
  • T
    • T
    • Recommended for most conditions up to the maximum temperature of the material. Tannic Acid 10%
    • Recommended for most conditions up to the maximum temperature of the material. Tartaric Acid (only up to 150°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tetrachlorethylene (Dry) (only up to 212°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tetrachloroethane (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tetrahydrofuran (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tin Acid (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tin Fluoborate (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. Toluene
    • Recommended for most conditions up to the maximum temperature of the material. Transformer Oil (only up to 120°F)
    • Recommended for most conditions up to the maximum temperature of the material. Trichloroethylene (Dry) (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Triethanolamine (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Trisodium Phosphate (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Tung Oil (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Turpentine
  • U
    • U
    • No data available. Customer testing required. UreaFormaldehyde Resin
  • V
    • V
    • Recommended for most conditions up to the maximum temperature of the material. Vanilla Extract
    • Recommended for most conditions up to the maximum temperature of the material. Varnish
    • Recommended for most conditions up to the maximum temperature of the material. Vegetables Oils (only up to 100°F)
    • Recommended for most conditions up to the maximum temperature of the material. Vinegar (only up to 150°F)
  • W
    • W
    • Recommended for most conditions up to the maximum temperature of the material. WaterFresh
    • Recommended for most conditions up to the maximum temperature of the material. WaterSalt
    • Recommended for most conditions up to the maximum temperature of the material. Waxes (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Whiskey (only up to 70°F)
    • Recommended for most conditions up to the maximum temperature of the material. Wine (only up to 70°F)
  • X
    • X
    • Recommended for most conditions up to the maximum temperature of the material. Xylene
  • Y
    • No Item in this section
  • Z
    • Z
    • Recommended for most conditions up to the maximum temperature of the material. Zinc Bromide
    • Recommended for most conditions up to the maximum temperature of the material. Zinc Cyanide
    • Recommended for most conditions up to the maximum temperature of the material. Zinc Fluoborate (only up to 130°F)
    • Recommended for most conditions up to the maximum temperature of the material. Zinc Sulfate

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.