Filter Housing

• Maximum Allowable Working Pressure:
  41 bar (600 psi)
• Rated Fatigue Pressure:
  41 bar (600 psi)
  10⁶ cycles per NFPA T2.06.01R2-2001
• Typical Burst Pressure:
  130 bar (2650 psi)
• Fluid Compatibility:
  Compatible with all petroleum oils, water glycols, water-oil emulsions and most synthetic hydraulic and lubrication fluids
• Temperature Range:
  Fluorocarbon Seals: -29 °C to 120 °C (-20 °F to 250 °F) 60 °C (140 °F) maximum in HWCF or water glycol fluids
• Materials of Construction:
  Aluminum alloy head and bowl.

Filter Element

• Filter Element Burst Pressure:
  10 bard (150 psid)
• Athalon™ Element Construction:
  Inorganic fibers impregnated and bonded with epoxy resins. Polymer endcaps. Anti-static media design.

The equipment has been assessed in accordance with the guidelines laid down in The European Pressure Directive 97/23/EC and has been classified within Sound Engineering Practice S.E.P. Suitable for use with Group 1 and 2 fluids only. Consult Sales for other fluid gas group suitability.

Length Code	Overall Length mm (in.)	Element Removal Clearance mm (in.)
03	192 (7.55)	69 (2.7)
07	283 (11.16)	69 (2.7)

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.

Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

Multiply actual flow rate times factor in the table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm.

209 Series Filter Elements — bard/1000 L/min (psid/US gpm)

Length Code	AZ	AP	AN	AS	AT
03	34.75 (1.907)	13.92 (0.764)	10.62 (0.583)	9.00 (0.494)	7.67 (0.421)
07	15.69 (0.861)	6.29 (0.345)	4.79 (0.263)	4.06 (0.223)	3.46 (0.190)

Sample ΔP calculation

UR209 Series 3" length housing with C16 (1" BSP) threaded ports using AN grade media. Operating conditions 20 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP
= ΔP housing + ΔP element
= (0.02 x 1.2/0.9) bard (housing)
+ ((20 x 10.62/1000) x 50/32 x 1.2/0.9) bard (element)
= 0.03 bard (housing) + 0.44 bard (element)
= 0.47 bard (6.8 psid)

Housings, Vessels, or Assemblies

Please select only from the following list of standard filter housing options.

Available UR209 Series Options

UR209HA16 03ZA1 UR209HC16 03ZA1 UR209HA16 07ZA1 UR209HC16 07ZA1 UR209HA16 03ZG1 UR209HC16 03ZG1 UR209HA16 07ZG1 UR209HC16 07ZG1	UR209HA16 03ZA1YS45 UR209HC16 03ZA1YS45 UR209HA16 07ZA1YS45 UR209HC16 07ZA1YS45 UR209HA16 03ZG1YS45 UR209HC16 03ZG1YS45 UR209HA16 07ZG1YS45 UR209HC16 07ZG1YS45

The specification of each filter housing part number is outlined in the tables below.

Section 1

Housing P/N: UR 209H [Table A] [Table 4] [Table 5]

Seal Kit P/N: SR210 SKZ

Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. The number 1 at the end of the Housing P/N designates 1 indicator port, fitted with a plastic shipping plug.

*Other seal material options are available; Contact Pall.

Table A

Port & Length Options

Tables 1, 2 and 3

A1603Z

A1607Z

C1603Z

C1607Z

Table 1: Housing Port Options

Code	Port Style	Max. Operating Pressure
A	SAE J1926 straight thread	41 bar (600 psi)
C	BSP ISO 228 threads	41 bar (600 psi)

Table 2: Port Size

Code	Port Style
16	1” nominal

Table 3: Housing Length and Seal Options

Code	Length and Seal Material
03Z	3” nominal length, fluorocarbon seals
07Z	7” nominal length, fluorocarbon seals

Table 4: Bypass Valve and Service Options

Code	Bypass Valve and Service Type
A1	1.7 bard (25 psid) bypass valve, head service
G1	4.5 bard (65 psid) bypass valve, head service

Table 5: Other Options

Code	Description
Omit	Aluminum alloy head and bowl
YS45	Anodized aluminium alloy finish for use with water glycols and HWCF

Section 2

Element P/N: UE 209 [Table 6] [Table 3]

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 6: Filter Element Options

Code	ßx(c) ≥2000 based on ISO 16889	CST Rating*
AZ	3	07/04/01
AP	5	11/08/03
AN	7	13/09/04
AS	12	15/11/06
AT	25	16/14/08

* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205

Section 3 (At least one Differential Pressure Indicator or ‘B’ type blanking plug must be ordered)

Differential Pressure Indicator P/N: RC [Table 1]  Z 091 Z [Table 2]

Note: If no differential pressure indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the plastic shipping plug.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 7: Indicator Options

Code	Brass Option indicator
A218M	Electrical switch (SPDT) with Hirschmann connector
A218R	Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D	Visual indicator

Code	Stainless Steel Option Indicator
778N	Visual filter with thermal lockout
861C*	Electrical Switch (SPDT) with Hirschmann connector
771B	Electrical switch (SPDT) with 3-pin

Other options available; contact Pall.
* Requires YM suffix after SS code from Table 8.

Table 8: Indicator Pressure Setting Options

Code	Description
084	For ‘A’ valve option housings (1.1. bard. 16 psid)
091	For ‘G’ valve option housings (3.5. bard. 50 psid)

Other setting options are available; contact Pall.

Table 9: Differential Pressure Indicator Material

Code	Pressure Setting
Omit	Brass Indicator: use at operating pressures < 200 bar (3000 psi)
SS	Stainless Steel Indicator: recommended for high pressure cycle applications with pressures > 200 bar (3000 psi)

Other setting options are available; contact Pall.