Maximum Acceptable Working Pressure:

Class 150: 260 psig (18 bar);
Class 300: 675 psig (46.5 bar) at 200°F (93°C)

Temperature Range:

-20°F to 200°F (-29°C to 93°C);
140°F (60°C) maximum in HWCF or water-glycol fluids

Filter Element Collapse Pressure:

150 psid (10 bar)

Hydrostatic Test Pressure:

Class 150: 390 psig (26.9 bar)
Class 300: 1013 psig (69.8 bar)

Materials of Construction:

Carbon steel option: carbon steel housing, nozzles, and flanges; carbon steel transfer valve body with stainless steel 304L valve ball and stem on “D” duplex model
Stainless steel option: 304L stainless steel housing, nozzles, and flanges; 316 stainless steel transfer valve body, valve ball, and stem on “D” duplex model

Finish:

Interior finish: coated with rust preventative
Permanent cores: tin plated
Exterior finish: two coats of zinc primer on carbon steel option

Housings are designed, manufactured, and stamped in accordance with ASME BPVC Section VIII Div. 1, including latest addenda.

Dimensional Drawings

Dimensions (303 Series)
Port Size	‘A’ Simplex Only	‘B’ Duplex Only	‘C’ Duplex Only	‘D’	‘E’	‘F’ Duplex Only	‘G’	‘L’ V-Length	‘L’ X-Length
JO2	10.00	3.94	23.94	8.00	8.66	5.12	10.75	50.06	63.06
J03	10.00	5.12	25.12	8.00	11.42	6.89	10.75	50.06	63.06
J04	10.00	5.90	25.90	8.00	13.78	7.28	10.75	50.06	63.06

Dimensions (383 Series)
Port Size	‘A’ Simplex Only	‘B’ Duplex Only	‘C’ Duplex Only	‘D’	‘E’	‘F’ Duplex Only	‘G’	‘L’ V-Length	‘L’ X-Length
JO4	14.10	5.90	34.20	8.00	13.78	7.28	16.00	N/A	61.75
J06	14.10	11.81	40.00	8.00	23.62	8.46	16.00	N/A	61.75

Figure 1. Housing Pressure Drop using fluid with 0.9 S.G. Housing Pressure drop is directly proportional to specific gravity.

303 Series with 8904 Elements

383 Series with 8314 Elements

Element Pressure Drop Factor.

Multiply actual flow rate times factor to determine pressure drop with fluid at 150 SUS (32 cSt), 0.9 S.G.
Correct for other viscosities by multiplying new viscosity in SUS/150 x new S.G/0.9.

*8904 Series Element P factor (psid/gpm)
Length	KZ	KP	KN	KS	KT
26"	0.033	0.015	0.012	0.009	0.006
39"	0.021	0.010	0.008	0.006	0.004

*8314 Series Element P factor (psid/gpm)
Length	KZ	KP	KN	KS	KT
39"	0.011	0.006	0.005	0.004	0.003
*Factors listed above have been adjusted to represent the total number of elements per housing.

Maximum Clean Element Pressure Drop for Bypass Valves

Calculated clean element pressure drop should not exceed the values listed in the table for the selected bypass valve option.

Bypass Option	‘E’ (5 psid)	‘F’ (12 psid)	‘D’ (18 psid)	‘A’ (25 psid)	‘B’ (50 psid)	‘W’ (non-bypass)
Max. Clean P	1 psid	2 psid	3 psid	4 psid	8 psid	15% of max P

Housings, Vessels, or Assemblies

Assembly P/N:

H

3

Table1

Table2

Table3

Table4

Table5

Table6

Table7

Table8

Table9

Replacement Element P/N:	HC	8904F
			Table5	Table6	Table1
	HC	8314F
			Table5	Table6	Table1

Note: Choose from the options in the following tables to compile the specific Product Number.

TABLE 1: SEAL OPTIONS
Code	Seals
H	Nitrile
Z	Fluorocarbon

TABLE 2: HOUSING OPTION*
Code	Option
03	8904 element
83	8314 element
*Housings accept 3 elements.

TABLE 3: HOUSING STYLE OPTIONS
Code	Style
S	Simplex - ports on same side
D	Duplex

 

TABLE 4: PORT OPTIONS
Code	Port	Availability
J02	2" ANSI B16.5 class 150 flanges	303 series
J03	3" ANSI B16.5 class 150 flanges	303 series
J04	4" ANSI B16.5 class 150 flanges	303 and 383 series
J06	6" ANSI B16.5 class 150 flanges	383 series
N02	2" ANSI B16.5 class 300 flanges	303 series
N03	3" ANSI B16.5 class 300 flanges	303 series
N04	4" ANSI B16.5 class 300 flanges	303 and 383 series
N06	6" ANSI B16.5 class 300 flanges	383 series

 

TABLE 5: FILTER ELEMENT OPTIONS
Code	ßx  200	ßx(c)=1000
KZ	<1	2.5
KP	3	5
KN	6	7
KS	12	12
KT	25	22

TABLE 6: LENGTH OPTIONS*
Assembly Code	Element Code**	Availability
V	26	303 series only
X	39	303 and 383 series
* Use code in second column for element part no. ** Nominal length in inches.

 

TABLE 7: BYPASS VALVE OPTIONS
Code	Cracking Pressure
A	25 psid
B	50 psid
D	18 psid
E	5 psid
F	12 psid
W	Non-bypass

TABLE 8: DIFFERENTIAL PRESSURE DEVICE OPTIONS
Code	Description
O	No indicator
B	Bleed plug and seal in place of indicator
P	Visual indicator with thermal lockout
S	Electrical switch with MS receptacle
L	Electrical switch with 6" leads
V	Electrical/visual indicator

 

TABLE 9: HOUSING MATERIAL OPTIONS
Code	Option
7	Carbon steel
9	304L stainless steel