Description
In many applications, electrical trace heaters for Pall Advanta housings offer a number of advantages:
- Easy installation-allowing simple upgrade of existing housings — the preformed cylindrical silicone jacket is self aligning with the Pall Advanta housing bowl. It can also be used on housings with 100 mm nominal diameter bowls*
- Simple temperature adjustment — control box has a digital input from ambient to 140 °C
- Large LED display of actual temperature — measured by PT100 or Thermocouple
- Separate IP54 rated control box allows full control independent of the housing location
- Low overall installation cost — no expensive steam valves, piping and pressure regulators required
- Easy removal or access for changeout of filter element
* Please contact Pall for further details
Specifications
Heating Jacket
| Jacket Material | Silicone Rubber |
| Insulation Material | Silicone Foam |
| Operating Voltage | 240 V (50 Hz) or 110 V (60 Hz) |
| Power Output | 305 mm (11.8 in.) long = 300 W¹ 559 mm (22 in.) long = 600 W² |
| Maximum Temperature De-energized | 200 °C (392 °F) |
| Temperature Sensor | PT100 |
| Thermal Cut-out Temperature Setting | 150 °C ± 5 °C (302 °F ± 41 °F) |
| Testing Voltage | 1500 VΩ |
| Insulation Value | Greater than 100 MΩ |
| Protection Rating | IP65 |
| Design Standard | EN 60519-1 and EN 60519-2 |
| Lead Length | 1 m (3.3 ft) |
¹ For 10 in. (254 mm) filter elements
² For 20 in. (508 mm) filter elements
Temperature Control Unit
| Housing Material | Polycarbonate |
| Operating Voltage | 240 V (50 Hz) or 110 V (60 Hz) |
| Recommended Temperature Setting Range | Ambient to 140 °C (284 °F)³ |
| Maximum Environmental Temperature for Controller | 55 °C (131 °F) |
| Maximum Output | 7A |
| Over Current Protection @ 23 °C Ambient | 4 seconds @ 12A; 1 seconds @ 24A |
| Set Temperature Display | 8 mm (0.31 in.) red LED display |
| Actual Temperature Display | 10 mm (0.39 in.) green LED display PID (Proportional Integral Derivative control via Autotune parameters set by the user) |
| Protection Rating | IP54 |
| Design Standards | EN61010-1 |
³ Consult filter element specifications for maximum operating temperatures
Applications
- Hot water tank vents-elimination of condensate to comply with current GMP
- Freeze dryer vacuum break filters — removal of residual water after steaming or integrity testing
- Filtration of ointment bases-reduction of viscosity or liquidification
- Bulk active ingredient production-temperature control to avoid crystalization during filtration
Type
Accessories and Spare Parts
Ordering Information
Pall Advanta Trace Heater System for Housings to hold 10 in. (254 mm) Filter Elements
| ACS0677AM | 240 V (50 Hz), UK Plug |
| ACS0678AM | 250 V (50 Hz), European Plug |
| ACS0685AM | Extension Lead set (10 m [33 ft]) |
Pall Advanta Trace Heater System for Housings to hold 20 in. (508 mm) Filter Elements
| ACS0681AM | 240 V (50 Hz), UK Plug |
| ACS0682AM | 250 V (50 Hz), European Plug |
| ACS0685AM | Extension Lead set (10 m [33 ft]) |
US Parts and Voltages
| ACS0798AM | 110V AC AB05 160W silicone heating jacket (5 in.) |
| ACS0679AM | 110V AC AB1 300W silicone heating jacket (10 in.) |
| ACS0683AM | 110V AC AB2 600W silicone heating jacket (20 in.) |
| ACS0807AM | 110V AC AB3 800W silicone heating jacket (30 in.) |
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
