PhotoKleen™ PF Filter Capsule product photo Primary L

PhotoKleen™ PF Filter Capsule

The PhotoKleen PF filter is designed for extremely small-volume dispense applications where low hold-up volume and cleanliness is critical. The PhotoKleen PF filter unit consists of quick disconnect head manifold and the all fluoro-polymer capsule. This configuration allows for safe, quick and easy filter change-outs. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.

Features and Benefits

  • Capsule-style filter assembly same as the PhotoKleen EZD-2 filter
  • Top in / top out flow direction, with inlet flow stream down to the bottom
  • Easy filter replacement (one step)
  • All fluoro-polymer construction
  • PTFE media 0.1 and 0.2 μm grade available
  • Minimized hold-up volume (50 mL)
  • Optimized for 60 mm-width footprint
  • Reduces chemical waste during filter startup and change out


Contact Us
* Required
The PhotoKleen PF filter is designed for extremely small-volume dispense applications where low hold-up volume and cleanliness is critical. The PhotoKleen PF filter unit consists of quick disconnect head manifold and the all fluoro-polymer capsule. This configuration allows for safe, quick and easy filter change-outs. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.

Features and Benefits

  • Capsule-style filter assembly same as the PhotoKleen EZD-2 filter
  • Top in / top out flow direction, with inlet flow stream down to the bottom
  • Easy filter replacement (one step)
  • All fluoro-polymer construction
  • PTFE media 0.1 and 0.2 μm grade available
  • Minimized hold-up volume (50 mL)
  • Optimized for 60 mm-width footprint
  • Reduces chemical waste during filter startup and change out

Materials of Filter Capsule

 
Components Materials
Filter Media PTFE
Support and Drainage PFA
Core, Cage, and End Caps PFA
Housing PFA
O-ring Perfluoroelastomer
 


 
Removal Ratings 0.1 μm, 0.2 μm
Filter Area 900 cm2
Maximum Operating Temperature 50 °C / 122 °F
Maximum Operating Pressure 0.29 MPaG @ 30 °C / 42 psig @ 86 °F
 

Filter Capsule Dimensions*3




*3 PhotoKleen EZD-2 head manifolds are compatible with PhotoKleen PF capsules.

Pressure Drop vs. Liquid Flow Rate (Water, 20°C)*2



*2 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in mPa・s.
Filter Capsules
PHF12UC [1] E [2]

Table 1

 
Code Filter Media Removal Ratings
FT PTFE 0.1 μm
FR PTFE 0.2 μm
 

Table 2

 
Code O-ring Options
H11 Perfluoroelastomer
 

Dummy Cartridge

 
Parts Number O-ring Options Memo
PHFC11H11C Perfluoroelastomer Dummy cartridge for system start up
 

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.