Description
Pall Gaskleen High-Bright purifier assemblies are designed to remove molecular contamination from ammonia gas. Sub-parts-per-billion (ppb) level purification is achieved for flow rates up to 1,000 slpm. Each purifier assembly includes an integrated particle filter.
- Low Cost of Ownership (CoO):
- Pall’s proprietary High-Bright material has up to twice the moisture removal capacity of molecular sieve-based technologies
- Conditioning time as low as 1 hour leads to significantly more tool uptime and lower gas usage
- Controls and removes impurities such as moisture, oxygen and carbon dioxide
- Electropolished 316L stainless steel housing
- Diffusion barrier ensures integrity of reactive material during installation
- 100% helium leak and pressure tested
- No detectable metal contribution above background in NH3 gas
Specifications
| Contaminant removal efficiency | • ‹ 1 part per billion (ppbv) of H2O, O2 and CO2 |
| Materials | • Housing: electropolished 316L SS • ≤ 0.25 μm / 10 μin Ra internal surface finish |
| Particle Removal Rating1 | • ≥ 3 nm or ≥ 0.4 μm (assembly dependent) |
| Connections | • Gasket seal (VCR2 or compatible) • PG11000 assemblies come standard with a backplate and isolation valves |
| Operating Conditions | • Maximum Operating Pressure See chart on page 2 • Maximum operating temperature3: 40˚C / 104˚F • EU Pressure Equipment Directive: Assemblies comply with the European Union’s Pressure Equipment Directive 97/23/EC. All assemblies except GLP and GTMP are CE marked. • The PG11000 assemblies are designed in accordance with the ASME BPVC Section VIII, Division 1, and have a U-Stamp. |
| Packaging | • Double bagged • Aluminized outer bag; polyethylene inner bag • End capped with metal seals • Product packaged in an inert environment |
1 Particle rating based on laboratory testing with NaCl aerosol.
2 VCR is a trademark of Swagelok Co.
3 Higher temperatures may be acceptable under certain conditions. Please contact Pall for more details.
Performance
Pressure Drop vs. Gas Flow Rate and Effective Capacity (Lifetime)
Pressure drop and lifetime information are dependent on purifier size and process conditions. Please contact Pall to discuss your specific application.
Type
Systems
Ordering Information
| Part Number | Particle Filter Rating | Rated Flow | Maximum Flow* | Inlet Connections |
| GLPNH3PVMM4 | ≥ 3 nm | 1 slpm | 2 slpm | 1⁄4 in male gasket seal |
| GLP2NH3PVMM4 | ≥ 3 nm | 3 slpm | 5 slpm | 1⁄4 in male gasket seal |
| GTMP3NH3PCC4 | ≥ 3 nm | 3 slpm | 5 slpm | 11⁄8 in c-seal |
| GLP5NH3PVMM4 | ≥ 3 nm | 5 slpm | 5 slpm | 1⁄4 in male gasket seal |
| GLP6NH3PVMM4 | ≥ 3 nm | 30 slpm | 50 slpm | 1⁄4 in male gasket seal |
| GLP8NH3PVMM4 | ≥ 3 nm | 50 slpm | 50 slpm | 1⁄4 in male gasket seal |
| GLP9NH3PFVMM4 | ≥ 3 nm | 75 slpm | 150 slpm | 1⁄4 in male gasket seal |
| GLP9NH3PVMM4 | ≥ 0.4 μm | 75 slpm | 1⁄4 in male gasket seal | |
| GLP24NH3PFVMM4 | ≥ 3 nm | 300 slpm | 320 slpm | 1⁄4 in male gasket seal |
| GLP24NH3PVMM4 | ≥ 0.4 μm | 300 slpm | 1⁄4 in male gasket seal | |
| GLP24ENH3PFVMM8 | ≥ 3 nm | 300 slpm | 320 slpm | 1⁄2 in male gasket seal |
| GLP24ENH3PVMM8 | ≥ 0.4 μm | 500 slpm | 1⁄2 in male gasket seal | |
| SGLP110NH3PVFM8 | ≥ 0.4 μm | 1,000 slpm | 1⁄2 in female gasket seal | |
| Part Number | Outlet Connections | Nominal Length (L) (mm / in.) | Nominal Diameter (D) (mm / in.) | Maxinum Operating Pressure Rating MPa / psig) |
| GLPNH3PVMM4 | 1⁄4 in male gasket seal | 84.1 / 3.31 | 21.3 / 0.84 | 20.7 / 3,000 |
| GLP2NH3PVMM4 | 1⁄4 in male gasket seal | 84.1 / 3.31 | 34.5 / 1.36 | 6.9 / 1,000 |
| GTMP3NH3PCC4 | 11⁄8 in c-seal | 76.2 / 3.00 | 28.6 / 1.13 | 3.4 / 500 |
| GLP5NH3PVMM4 | 1⁄4 in male gasket seal | 127.0 / 5.00 | 31.8 / 1.25 | 15.2 / 2,200 |
| GLP6NH3PVMM4 | 1⁄4 in male gasket seal | 114.3 / 4.50 | 34.5 / 1.36 | 6.9 / 1,000 |
| GLP8NH3PVMM4 | 1⁄4 in male gasket seal | 208.3 / 8.20 | 63.5 / 2.50 | 5.2 / 750 |
| GLP9NH3PFVMM4 | 1⁄4 in male gasket seal | 201.7 / 7.94 | 76.2 / 3.00 | 3.4 / 500 |
| GLP9NH3PVMM4 | 1⁄4 in male gasket seal | 201.7 / 7.94 | 76.2 / 3.00 | 3.4 / 500 |
| GLP24NH3PFVMM4 | 1⁄4 in male gasket seal | 439.4 / 17.30 | 101.6 / 4.00 | 3.4 / 500 |
| GLP24NH3PVMM4 | 1⁄4 in male gasket seal | 439.4 / 17.30 | 101.6 / 4.00 | 3.4 / 500 |
| GLP24ENH3PFVMM8 | 1⁄2 in male gasket seal | 447.0 / 17.60 | 101.6 / 4.00 | 3.4 / 500 |
| GLP24ENH3PVMM8 | 1⁄2 in male gasket seal | 447.0 / 17.60 | 101.6 / 4.00 | 3.4 / 500 |
| SGLP110NH3PVFM8 | 1⁄2 in male gasket seal | 974.2 / 38.36 | 152.4 / 6.00 | 1.7 / 250 |
* Based on 109 particle removal efficiency
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
