Ultipleat® High Flow Filters product photo Primary L

Ultipleat® High Flow Filters

The Ultipleat®High Flow filter is suited for applications such as cooling water, pre-RO, and resin trap filtration. It is a large diameter, coreless, single open-ended, pleated cartridge with an inside to outside flow pattern. The filter's unique crescent-shaped pleat geometry, combined with its large 152 mm / 6 in diameter, reduces the number of filters and size of housing required. The cartridge is also available in a wide range of Pall media types for other applications.
  • Up to 50% smaller filter system possible
  • Up to forty times fewer elements to change out
  • Very high flow rates per filter cartridge, up to 500 gpm / 114 m3/hr
  • Available in 508 mm / 20 in., 1016 mm / 40 in. and 1524 mm / 60 in. lengths
  • Coreless construction to minimize waste disposal
  • Absolute rated filter medium for reproducible performance
  • Inside to outside flow configuration - all contaminants held within the single open ended filter


Contact Us
* Required

Description

The Ultipleat®High Flow filter is suited for applications such as cooling water, pre-RO, and resin trap filtration. It is a large diameter, coreless, single open-ended, pleated cartridge with an inside to outside flow pattern. The filter's unique crescent-shaped pleat geometry, combined with its large 152 mm / 6 in diameter, reduces the number of filters and size of housing required. The cartridge is also available in a wide range of Pall media types for other applications.
  • Up to 50% smaller filter system possible
  • Up to forty times fewer elements to change out
  • Very high flow rates per filter cartridge, up to 500 gpm / 114 m3/hr
  • Available in 508 mm / 20 in., 1016 mm / 40 in. and 1524 mm / 60 in. lengths
  • Coreless construction to minimize waste disposal
  • Absolute rated filter medium for reproducible performance
  • Inside to outside flow configuration - all contaminants held within the single open ended filter

Specifications

Materials of Construction

 
Filter medium Pleated polypropylene depth
structure
Support/Drainage Polypropylene
Endcaps Glass filled polypropylene
O-ring Ethylene propylene
 
 
Removal Ratings1 2.0 μm2, 4.5 μm, 10 μm, 20 μm,
40 μm, 70 μm, 100 μm
Configuration Single open end, 152 mm / 6 in
diameter filter
Operating Conditions Maximum Operating Temperature:
82°C / 180°F
Maximum Differential Pressure3
(nominal inside to outside flow):
3.4 bar at 82°C / 50 psid at 180°F
 
1 The test procedure used is an adaptation of ISO 4572, modified to determine the micron size above which particles are quantitatively removed.
2 2 micron at 99% efficiency.
3 For fluids compatible with the filter element at the stated temperature.

Performance

Removal Rating / Typical Pressure Drop

 
Cartridge Grade Removal Rating in Microns (μm) at 99.98% Efficiency1 Element Pressure Drop2 508 mm / 20 in length (mbar/m3/h) / (psid/100 gpm) Element Pressure Drop2 1016 mm / 40 in length (mbar/m3/h) / (psid/100 gpm) Element Pressure Drop2 1524 mm / 60 in length (mbar/m3/h) / (psid/100 gpm)
UY020 2.03 3.31 / 1.091 1.64 / 0.540 1.10 / 0.362
UY045 4.5 1.48 / 0.489 0.73 / 0.242 0.49 / 0.162
UY100 10 1.04 / 0.344 0.52 / 0.170 0.35 / 0.114
UY200 20 0.74 / 0.243 0.36 / 0.120 0.24 / 0.080
UY400 40 0.55 / 0.182 0.27 / 0.090 0.18 / 0.060
UY700 70 0.12 / 0.040 0.06 / 0.020 0.04 / 0.013
 
1 The test procedure used is an adaptation of ISO 4572, modified to determine the micron size above which particles are quantitatively removed.
2 Pressure drop in psid per US gpm and mbar per cubic meter per hour for the cartridge length shown. Multiply this value by the total system flow to determine the aqueous pressure drop. Next for fluids other than water, multiply this value by the fluid's viscosity at the operating temperature in centipoise. This value is the pressure drop across the Ultipleat® High Flow filter(s) only; it must be added to the pressure drop due to the Ultipleat® High Flow filter housing.
3 2 micron at 99% efficiency.

Type

Large Format Filters

Ordering Information

 
Part Number Removal Rating4 (μm) Nominal Length4 (in. / mm) O-ring Material4
HFU620UY020J 2.0 20 / 508 Ethylene Propylene
HFU640UY020J 2.0 40 / 1016 Ethylene Propylene
HFU660UY020J 2.0 60 / 1524 Ethylene Propylene
HFU620UY045J 4.5 20 / 508 Ethylene Propylene
HFU640UY045J 4.5 40 / 1016 Ethylene Propylene
HFU660UY045J 4.5 60 / 1524 Ethylene Propylene
HFU620UY100J 10 20 / 508 Ethylene Propylene
HFU640UY100J 10 40 / 1016 Ethylene Propylene
HFU660UY100J 10 60 / 1524 Ethylene Propylene
HFU620UY200J 20 20 / 508 Ethylene Propylene
HFU640UY200J 20 40 / 1016 Ethylene Propylene
HFU660UY200J 20 60 / 1524 Ethylene Propylene
HFU620UY400J 40 20 / 508 Ethylene Propylene
HFU640UY400J 40 40 / 1016 Ethylene Propylene
HFU660UY400J 40 60 / 1524 Ethylene Propylene
HFU620UY700J 70 20 / 508 Ethylene Propylene
HFU640UY700J 70 40 / 1016 Ethylene Propylene
HFU660UY700J 70 60 / 1524 Ethylene Propylene
 
4 Other options available - contact Pall Microelectronics for details.


Unit conversion: 1 bar = 100 kilopascals

Reviews

Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

*Subject to Terms and Conditions.