Fluoro-Plus™ II PFA Filter Housings

Materials of Construction

• Housing: High purity PFA head, bowl and plugs
• O-ring: FEP encapsulated fluoroelastomer
• Locking Ring: PVDF (non-wetted part)

Connections

• Inlet / Outlet:
  • ³⁄₄ in. or 1 in. flare
  • Flowell¹
  • Pillar²
  • ³⁄₄ in. or 1 in. butt weld pipe
• Vent and Drain:
  • ¹⁄₄ in. flare
  • ³⁄₈ in. flare
  • ¹⁄₄ in. butt weld pipe
  • ¹⁄₄ in. female NPT
  • ¹⁄₄ in. closed end
• Cartridge Connection: Double 222 O-ring

Operating Conditions

• Maximum Operating Pressure
  • 50 psig @ 194 °F / 3.4 bar @ 90 °C
  • 100 psig @ 77 °F / 6.9 bar @ 25 °C

Note: Maximum operating pressure ratings are vessel ratings only. Safe operating temperature and pressure will depend on filter cartridge and O-ring used. Product not rated for gas service. For inquiries on compatibility, contact Pall Microelectronics.

¹ Flowell is a product of Flowell Co., Ltd.
² Pillar Fitting is a trademark of Nippon Pillar Packing Co., Ltd.

Pressure Drop vs. Liquid Flow Rate³

³ For liquids other than water, multiply the pressure drop by the specific gravity of the fluid. Pressure drop curve represents an empty housing.

Housings, Vessels, or Assemblies

Dimensions

Dimensional Data

Description	Housing Style	Length (L) (in. / mm)		Width (W) (in. / mm)
		T	S	T	S
Fluoro-Plus II PFA 10 in. / 254 mm housing with:	3⁄4 in. Butt weld pipe fitting	16.0 / 406	17.3 / 439	9.0 / 229	5.9 / 150
	3⁄4 in. Flare style fitting	19.5 / 495	16.3 / 414	10.5 / 267	5.9 / 150
	1 in. Butt weld pipe fitting	16.0 / 406	14.3 / 363	9.0 / 229	5.9 / 150
	1 in. Flare style fitting	19.5 / 495	16.3 / 414	11.0 / 279	5.9 / 150
Fluoro-Plus II PFA 20 in. / 508 mm housing with:	3⁄4 in. Butt weld pipe fitting	25.7 / 653		9.0 / 229
	3⁄4 in. Flare style fitting	29.3 / 744		10.5 / 267
	1 in. Butt weld pipe fitting	25.7 / 653		9.0 / 229
	1 in. Flare style fitting	29.3 / 744		11.0 / 279
Fluoro-Plus II PFA 30 in. / 762 mm housing with:	3⁄4 in. Butt weld pipe fitting	35.5 / 902		9.0 / 229
	3⁄4 in. Flare style fitting	39.1 / 993		10.5 / 267
	1 in. Butt weld pipe fitting	35.5 / 902		9.0 / 229
	1 in. Flare style fitting	39.1 / 993		11.0 / 279

This information is a guide to the part number structure and possible options. For availability of specific options and housing details, please contact Pall.

Example Part Number: FP T 20 ³⁄₄ FW ³⁄₈ FLC ( See bold references in tables below)

Part Number:
FP < End Configuration Code from Table 1 > < Length Code from Table 2 > < Inlet/Outlet Size Code from Table 3 > < Inlet/Outlet Style Code from Table 4 > < Vent/Drain Size Code from Table 5 > < Vent/Drain Style Code from Table 6 >

Table 1 - End Configurations

Code	End Configurations
T	T-style
S	Straight (in-line)

Table 2 - Lengths

Code	Lengths
10	10 in. bowl
20	20 in. bowl (T-style only)
30	30 in. bowl (T-style only)

Table 3 - Inlet/Outlet Sizes

Code	Inlet/Outlet Sizes
3⁄4	3⁄4 in.
1	1 in.

Table 4 - Inlet/Outlet Styles

Code	Inlet/Outlet Styles
BW	Butt weld
FL	Flare
FG	1 in. Flange (T-style only)
FW	Flowell
PL	Pillar style fittings
FLC	Flare cap installed

Table 5 - Vent/Drain Sizes

Code	Vent/Drain Sizes
1⁄4	1⁄4 in.
3⁄8	3⁄8 in. (Flare only)

Table 6 - Vent/Drain Styles

Code	Vent/Drain Styles
BW	Butt weld
FL	Flare
CE	Closed end
FP	Female pipe thread
FW	Flowell
PL	Pillar style fittings
FLC	Flare cap installed

Part Number
ACS0655AA	Spanner wrench
T8316030	Mounting clamp and bolt assembly