SWD and SWF Small Capsules for POU

Product Name	XpressKleen SWF Capsules	Ultipleat SP DR SWD Capsules
Membrane Materials	Surface modified PTFE	Highly Asymmetric PolyArylSulfone (HAPAS)
Hardware (Supports, Capsule)	PFA	HDPE
Removal Ratings	5 nm	10 nm       | 5 nm       | 2 nm
Filter Areas	0.3 m2 / 3.2 ft2	0.25 m2 / 2.7 ft2        | 0.2 m2 / 2.2 ft2
Configurations	U-flow	U-flow
Connections (Inlet / Outlet, Vent)	1/4”, Super Pillar2 300 P series (Nippon Pillar)
Maximum Operating Temperature	130 °C / 266 °F	60 °C / 140 °F
Maximum Operating Pressure	0.35 MPaG / 50 psig @ 40 °C / 104 °F 0.29 MPaG / 42 psig @ 60 °C / 140 °F 0.24 MPaG / 34 psig @ 80 °C / 176 °F 0.20 MPaG / 29 psig @ 95 °C / 203 °F 0.18 MPaG / 26 psig @ 110 °C / 230 °F 0.15 MPaG / 21 psig @ 130 °C / 266 °F	0.35 MPaG / 51 psig @ 38 °C / 100 °F 0.17 MPaG / 25 psig @ 60 °C / 140 °F
Maximum Forward Differential Pressure	0.20 MPaG / 29 psig @ 95 °C / 203 °F 0.15 MPaG / 21 psig @ 130 °C / 266 °F	0.1 MPaG / 15 psig @ 60 °C / 140 °F

² Pillar is a trademark of Nippon Pillar Packing Co.

Filter Capsules

Dimensions (nominal)

Typical Flow Characteristics - 1cP fluid, 20℃

XpressKleen SWF Capsules Ultipleat SP DR SWD Capsules

Part Numbers / Ordering Information

SW [1] 03 [2] 4E71 [3]

Table 1

Code	Capsule Format	Capsule Materials
D	SWD	HDPE
F	SWF	PFA

Table 2

Code	Removal Ratings	Media Materials	Capsule Format Availability
HSAH	2 nm	HAPAS	SWD
HSSH	5 nm	HAPAS	SWD
HSVH	10 nm	HAPAS	SWD
XP5	5 nm	PTFE	SWF

Table 3

Code	Prewet option	Applicable Capsule	Note
None	Standard with low extractables	SWF
-K18	Dry with low extractales	SWF	Nuts are not included in the box.
-K13C	Standard with low extractables	SWD
-K13D	Standard with low extractables for 2 nm only	SWD

Connections (Inlet/Outlet, Vent) : 1/4”, Super Pillar 300 P series (Nippon Pillar)