Description
- A sensing probe immersed in the fluid to directly monitor dissolved water content and temperature
- Water content expressed as % saturation or PPM and temperature in ®C or ®F
- High temperature sensing
- Simple to operate
- Robust modular housing and sensing probe designs
- Available with or without display
- Included PC configuration software with RS232 communication cable
- Two relay outputs standard (except if RS485 output is ordered)
- Optional RS485 output (not available with relay outputs)
- Two freely scaleable and selectable analogue outputs, 4-20 mA, 0-5 V or 0-10 V (factory default setting is 4-20 mA)
- Simple and flexible installation
The Pall WS08 Series water sensor provides precise and reliable measurement of dissolved water content in industrial process fluids. It is ideal for in-line monitoring of moisture in hydraulic, lubrication and insulation oils, contributing to the predictive maintenance of plant and machinery.
Specifically designed for harsh industrial environments the WS08 Water Sensor features a modular housing concept and simple on-site
adjustment.
For detailed information about this product, please refer to the data sheet. (To download this data sheet, select Download PDF from the menu above.)
Specifications
Technical Data
| Measured Values | ||
| Saturation | ||
| % saturation sensor | HC1000-400 | |
| Measuring range | 0 - 100% | |
| Accuracy incl. hysteresis and nonlinearity in air - Standard calibration |
± 2% (0 - 90%S) ± 3% (90 - 100%S) |
|
| Temperature | ||
| Temperature sensor element | Pt1000 (Tolerance class A, DIN EN 60751) | |
| Working range sensing probe | -40 - 180 ºC (-40 - 356 ºF) | |
| Outputs | ||
| Two freely selectable scaleable analogue outputs 0…100% RH / xx…YYºC respectively |
0 -1 /5 /10V | -1mA < IL < 1mA |
| 4 - 20mA | RL < 500 Ohm | |
| 0 - 20mA | RL < 500 Ohm | |
| General | ||
| Supply voltage: | 8 - 35V DC) 12 - 30V AC (optional 100 - 240V AC, 50/60 Hz) |
|
| System requirements for software: | Windows 7 or later; serial interface | |
| Serial interface for configuration: | RS232C | |
| Housing / Protection class: | Polycarbonate / IP65; Nema 4 | |
| Cable gland: | M16 x 1.5 cable® 4.5 - 10mm (0.18 - 0.39”) | |
| Electrical connection: | Screw terminals up to max. 1.5mm2 (AWG 16) | |
| Electromagnetic compatibility | EN61326-1 EN61326-2-3 ICES-003 ClassB Industrial Environment FCC Part15 ClassB |
|
| Display: | Graphical LC display (128 x 32 pixels), with integrated pushbuttons for selecting parameters and MIN/MAX function |
|
| Switching parameters (freely selectable) | %S | % saturation |
| T | Temperature | |
| X | Water content | |
| Options | ||
| Alarm outputs: Integrated Power Supply Module Digital Interface |
2 x 1 switch contact: 250V AC / 6A and 28V DC / 6A threshold + hysteresis can be adjusted with configuration software allows the device to be powered with 100 - 240V AC (50/60Hz) Digital Interface RS485 with Modbus RTU, up to 32 devices in one bus |
|
Dimensions
All dimensions in mm
Type
Use
Ordering Information
Table 1
| Code | Display options |
| Omit | No options |
| R | Relay Alarms |
| M | RS485 / Modbus |
| V | AC Power |
Table 2
| Code | Probe Fitting |
| B08 | ½” NPT thread |
| C08 | ½” ISO thread |
Table 3
| Code | Probe Length |
| Omit | 100 mm (3.9 in) |
| L | 200 mm (7.9 in) |
Table 4
| Code | Cable Length |
| Omit | 2M (6.56 ft) |
| 05 | 5M (16.4 ft) |
| 10 | 10M (32.81 ft) |
Please select only from the following list of standard Water Sensor options:
| WS18DSB08 WS18DSB0805 WS18DSB0810 WS18DSB08L WS18DSB08L05 WS18DSB08L10 |
WS18DSC08 WS18DSC0805 WS18DSC0810 WS18DSC08L WS18DSC08L05 WS18DSC08L10 |
WS18DSRB08 WS18DSRB08L WS18DSRB08 WS18DSRB08L WS18DSVB08 WS18DSVB08L |
WS18DSVB08 WS18DSMB08L WS18DSMB08 WS18DSMB08L WS18DSMB08 WS18DSMB08L |
Reviews
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
