Seitz® PERMAdur® S Support Sheets

Ideal for high performance and longevity 

The Seitz Permadur S Support Sheets afford stable, reusable precoat filtration in plate and frame presses. After filtration, the plate and frame are opened. The filter cake is removed, leaving the Seitz PERMAdur S filter sheet ready for the next run. Made of high-quality cellulose and polyolefin fibers, Seitz PERMAdur S support sheets' production is based on the latest technological and scientific achievements in-depth filter media. Get the support sheets with up to 30 percent longer service life over conventional sheets.  

  • Reduced appearance of swelling in the DE filter during filtration
  • May be removed from the filter intact without risk of damage or tearing
  • Retention of wet strength even with repeated hot sanitizations
  • Full traceability - Each individual filter sheet is laser etched with the sheet grade, batch number and production date. The packing label includes sheet grade, batch, identification number and a fork and glass symbol.

Order Products

Filter Media

Polypropylene

Poly-Fine® II, Filter Cartridges, Removal Rating 0.2 μm, Polypropylene, Length 20 Inches product photo

PolyFine-II Filter Cartridge, Polyproylene, 0.2 µm, 20 in, Fluorocarbon elastomer, M3

Product ID: PFT02HA20UVM3B623
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: PFT02510UEM3
Unit of Measure
30/EA
Min Order Qty
30
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, Nitrile product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, Nitrile

Product ID: PFT02510UN
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, silicone, DOE internal O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, silicone, DOE internal O-rings

Product ID: PFT02510USM10
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.25 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 10 Inches, Fluorocarbon Elastomer, SOE fin end external 226 O-rings

Product ID: PFT02510UVM7
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, DOE industrial

Product ID: PFT02520UE
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, EPDM, SOE fin end external 226 O-rings

Product ID: PFT02520UEM7
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, FEP encapsulated Fluorocarbon Elastomer Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, FEP encapsulated Fluorocarbon Elastomer Orings, SOE fin end external 226 O-rings

Product ID: PFT02520UFM7
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.25 µm
Membrane Material
Polypropylene
Industry-Specific Certification
General Use
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
See All Attributes
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, silicone, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 20 Inches, silicone, SOE fin end external 226 O-rings

Product ID: PFT02520USM7
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, EPDM, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: PFT02530UEM3
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE flat closed end external 222 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE flat closed end external 222 O-rings

Product ID: PFT02530UTM3
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings product photo

Poly-Fine® II, Filter Cartridges, Removal Rating 0.25 μm, Polypropylene, Length 30 Inches, Expanded PTFE gaskets FEP encapsulated silicone Orings, SOE fin end external 226 O-rings

Product ID: PFT02530UTM7
Unit of Measure
1/EA
Min Order Qty
1
0.25 µm
779 Items

Documents

Datasheet

  • PERMAdur S

    Select Language :
    English

Instructions for Use

  • Seitz Sheets: Instructions

    Select Language :
    English

Specifications

Food Contact Compliance 

  • Please refer to the Pall website for a Declaration of Compliance to specific National Legislation and/or Regional Regulatory requirements for food contact use.

 

Materials of Construction

  • Main components: Celluloses, Polyolefin fibers
  • Components <3%: Resin

 

Characterization:

  • Mass per unit area g/m2 - 855
  • Thickness mm – 3.5
  • Ash %  < 1
  • Heavy metals* (ppm) < 50
  • Permeability L/m2/min at 1 bar 4370

 

These figures have been determined in accordance with in-house test methods and the methods of the Technical / Analytical Work Group within the European Depth Filtration Association. *According to recommendation XXXVI/1 of the BgW.

 

  • Exctractable ions soluble in 5% acetic acid mg/m2
  • CA 800
  • Fe 5
  • Al 15

 

Quality

Filter sheets produced in a controlled environment. Manufactured according to ISO 9001:2015 certified Quality Management System.

 

Suggested Operating Instructions

Handling during installation 

  1. Place sheet over support plate of the plate and frame filter
  2. For filters with manual tightening device: moisten filter sheets then tighten
  3. For filters with hydraulic tightening device: tighten up to filter pre-pressure of 30-35 bar (432-507 psi). Rinse the filter with warm water at ambient temperature in a forward flow direction with at a flow of at least 50 L/m2
  4. Control and adjust the filter to a pre-pressure of 30-35 bar (432-507 psi) and sterilize

 

Rinsing post filtration 

  1. Flush with water at a temperature of 50-55 °C (122-131 °F)
  2. Flow in the forward direction: should be at least nominal filter output
  3. Counter pressure of 0.5 bar (7.25 psi)
  4. Duration: 10-15 minutes or until the rinse water is clear.

 

Hot water flushing 

  1. Water temperature: >85 °C (185 °F)
  2. Flow in the forward direction: minimal nominal filter output
  3. Counter pressure of 0.5 bar (7.25 psi)
  4. Duration: until a temperature of at least 85 °C (185 °F) is achieved on the outlet side. Allow the filter to stand for at least 30 minutes with hot water. Open the vent valve on the filter inlet side.

 

Steaming 

  1. Steam temperature: max 121 °C (250 °F), low-pressure steam
  2. Duration: 20 minutes