Claris® Polypropylene Depth Filter Cartridges

For Consistent, Reliable Filtration at an Economical Cost

Claris melt blown depth filter cartridges offer coarser ratings for primary or pre-filtration applications and higher fluid flow applications where cleanliness levels are not specified. When used in industrial applications, these spunbond depth filter cartridges are for general particulate reduction and less sensitive component protection at temperatures less than 60 °C (140°F).

Shop Claris® Nominal Depth Pleated Filter Cartridges | Pall Shop

Order Products

Industries

Industrial Manufacturing

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE Santoprene gasket seal product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 30 inches, DOE Santoprene gasket seal

Product ID: CLR130H21
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
30 in
Cartridge Length (Metric)
762 mm
Cartridge Length (Metric)
76.2 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.25 inches product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 29.25 inches

Product ID: CLR12925
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
29.25 in
Cartridge Length (Metric)
743 mm
Cartridge Length (Metric)
74.3 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene

Product ID: CLR1395
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Gasket / O-Ring Material
NA
End Configuration Code
Blank
End Configuration
Blank - DOE industrial (no end caps)
Change Out Differential Pressure
2.4 bard
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, DOE Santoprene gasket seal product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, DOE Santoprene gasket seal

Product ID: CLR140H21
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
NA
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-rings product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 40 inches, EPDM, SOE flat closed end external 222 O-rings

Product ID: CLR140M3E
Unit of Measure
24/EA
Min Order Qty
24
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
40 in
Cartridge Length (Metric)
1016 mm
Cartridge Length (Metric)
101.6 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 50 inches, EPDM product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 50 inches, EPDM

Product ID: CLR150M18E
Unit of Measure
10/EA
Min Order Qty
10
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
50 in
Cartridge Length (Metric)
1270 mm
Cartridge Length (Metric)
127 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 50 inches, silicone product photo

Claris® Filter Cartridges, Removal Rating 1 μm, Polypropylene, Length 50 inches, silicone

Product ID: CLR150M8S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
1 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
50 in
Cartridge Length (Metric)
1270 mm
Cartridge Length (Metric)
127 cm
Gasket / O-Ring Material
Silicone
See All Attributes
Claris, Polypropylene, 1 micron, 9.75 inch product photo

Claris, Polypropylene, 1 micron, 9.75 inch

Product ID: CLR1975
Unit of Measure
36/EA
Min Order Qty
36
24.8 cm / 9.75 in
1 micron
Claris® Filter Cartridges, Polypropylene, Length 10 inches product photo

Claris® Filter Cartridges, Polypropylene, Length 10 inches

Product ID: CLR10010892
Unit of Measure
36/EA
Min Order Qty
36
Membrane Material
Polypropylene
Cartridge Length (Imperial)
10 in
Cartridge Length (Metric)
254 mm
Cartridge Length (Metric)
25.4 cm
Gasket / O-Ring Material
NA
End Configuration Code
Blank
See All Attributes
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 19.5 inches product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 19.5 inches

Product ID: CLR10195
Unit of Measure
24/EA
Min Order Qty
24
49.5 cm / 19.5 in
10 micron
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, EPDM product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, EPDM

Product ID: CLR1020M3E
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
EPDM
See All Attributes
Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, silicone, SOE fin end external 222 O-rings product photo

Claris® Filter Cartridges, Removal Rating 10 μm, Polypropylene, Length 20 inches, silicone, SOE fin end external 222 O-rings

Product ID: CLR1020M8S
Unit of Measure
12/EA
Min Order Qty
12
Removal Rating
10 µm
Membrane Material
Polypropylene
Cartridge Length (Imperial)
20 in
Cartridge Length (Metric)
508 mm
Cartridge Length (Metric)
50.8 cm
Gasket / O-Ring Material
Silicone
See All Attributes
85 Items

Description

Why choose Claris depth filter cartridges?

These cartridges are an economical option to achieve consistent filter performance, reliability and strength (alternative to molded cores) without compromising filter integrity or media depth.

 

Additional benefits include:

 

  • Easy and safe cartridge incineration and disposal
  • Capable of coarser ratings
  • No surfactants, binders, anti-static agents, or adhesives

Product Highlights:

  • The most economical melt blown depth filter cartridge
  • All polypropylene construction
  • Long service life
  • Produced according to quality ISO standards
  • Various assembly end configurations are available to match housing internals 

Applications

Chemicals and Polymers

  • Chemicals – Intermediate product (other), raw material (gas, air, liquid) and final product (liquid)
  • Petrochemicals – Amine, Benfield and other solvent loops

Food and Beverage

  • Bottled Water – Incoming water primary filtration, particulate control and pre-RO filtration
  • Soft Drinks – Incoming water primary filtration, particulate control and pre- RO filtration
  • Beer (corporate)– Particle filtration
  • Juice – Water filtration

Oil and Gas

  • Upstream – Injection water and SRU
  • Midstream – LNG acid gas, acid gas, glycol filtration and process water
  • Refinery – Amine systems

Microelectronics

  • Photovoltaics – Waste reclaim and wet etch and cleans

Power and Utilities

  • Combined Cycle Plants – Turbine lubrication

Industrial Manufacturing

  • Automotive – Filling lines/filling stations, parts washing, pre-treatment and e-coat, sealant, paint and coatings, stamping and test stands
  • Mining Equipment – Fuel filtration (on and off-board), gear case, hydraulic fluid, lube oil (on and off-board), final product (post smelt/burn off impurities), slurry, wastewater and rinsing water

Specifications

Documents

Data Sheet

  • Claris Filter Cartridges for General Purpose Particle Reduction

    Select Language :
    English

  • 1251-10C - Claris® Series Filter Cartridges

    Select Language :
    English