Ultipor III Filter Elements

With Pall Ultipor® III filter elements, you can achieve –

  • advanced system component protection
  • extended fluid life
  • long element service life
  • reduced element disposal frequency and maintenance costs
  • an environmentally friendly filtration system

These cost-effective elements feature innovative technologies such as a patented ®helical wrap® pleat support. Coreless versions weigh up to 60% less than comparable elements with metal end caps and cores.

Pall’s Ultipor III filter elements come with a unique “composite” construction for achieving and maintaining the required fluid cleanliness. These are used in a variety of lube & hydraulic systems such as turbine hydraulic system filters are a high-performance solution for applications in industrial manufacturing and power generation.

Ultipor lll Filter Elements

Product images are a representation of product family for illustration purposes only. Actual products may vary.

Order Products

Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB05DFL7PH4
Unit of Measure
1/EA
Min Order Qty
1
5 in
125 mm
Code 7
Silicone
See All Attributes
Supor® EKV filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end product photo

Supor® EKV filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end

Product ID: AB05EKV2PH4
Unit of Measure
1/EA
Min Order Qty
1
5 in
127 mm
Code 2
Silicone
See All Attributes
Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end product photo

Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end

Product ID: AB05PFA2PVH4
Unit of Measure
1/EA
Min Order Qty
1
5 in
127 mm
Code 2
Silicone
See All Attributes
Fluorodyne® EX EDF membrane filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end product photo

Fluorodyne® EX EDF membrane filter cartridge, 0.2 µm removal rating, 5-inch length, double-o-ring (silicone) with bayonet lock and flat end

Product ID: AB05UEDF2PH4
Unit of Measure
1/EA
Min Order Qty
1
5 in
127 mm
Code 2
Silicone
See All Attributes
Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB1DFL7PH4
Unit of Measure
1/EA
Min Order Qty
1
10 in
254 mm
Code 7
Silicone
See All Attributes
Supor® EKV filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Supor® EKV filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB1EKV7PH4
Unit of Measure
1/EA
Min Order Qty
1
10 in
254 mm
Code 7
Silicone
See All Attributes
Posidyne® membrane filter cartridge, 0.2 µm removal rating, endotoxin control, 10-inch length, double o-ring (silicone) with bayonet lock and fin end product photo

Posidyne® membrane filter cartridge, 0.2 µm removal rating, endotoxin control, 10-inch length, double o-ring (silicone) with bayonet lock and fin end

Product ID: AB1NFZ7PH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Positively-charged Nylon 6,6
Membrane Brand
Posidyne
Industry-Specific Certification
Pharmaceutical Grade
Effective Filtration Area (Metric cm²)
7900 cm²
Sterilization Option(s)
Suitable for Autoclave or SIP
See All Attributes
Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Emflon® PFA membrane filter cartridge, 0.2 µm bioburden reduction, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB1PFA7PVH4
Unit of Measure
1/EA
Min Order Qty
1
10 in
254 mm
Code 7
Silicone
See All Attributes
Supor® EX ECV membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Supor® EX ECV membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB1UECV7PH4
Unit of Measure
1/EA
Min Order Qty
1
10 in
254 mm
Code 7
Silicone
See All Attributes
Fluorodyne® EX EDF membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Fluorodyne® EX EDF membrane filter cartridge, 0.2 µm removal rating, 10-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB1UEDF7PH4
Unit of Measure
1/EA
Min Order Qty
1
10 in
254 mm
Code 7
Silicone
See All Attributes
Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 20-inch length, double-o-ring (silicone) with bayonet lock and fin end product photo

Fluorodyne® II DFL membrane filter cartridge, 0.2 µm removal rating, 20-inch length, double-o-ring (silicone) with bayonet lock and fin end

Product ID: AB2DFL7PH4
Unit of Measure
1/EA
Min Order Qty
1
20 in
508 mm
Code 7
Silicone
See All Attributes
Posidyne® membrane filter cartridge, 0.2 µm removal rating, endotoxin control, 20-inch length, double o-ring (silicone) with bayonet lock and fin end product photo

Posidyne® membrane filter cartridge, 0.2 µm removal rating, endotoxin control, 20-inch length, double o-ring (silicone) with bayonet lock and fin end

Product ID: AB2NFZ7PH4
Unit of Measure
1/EA
Min Order Qty
1
Removal Rating
0.2 µm
Membrane Material
Positively-charged Nylon 6,6
Membrane Brand
Posidyne
Industry-Specific Certification
Pharmaceutical Grade
Effective Filtration Area (Metric cm²)
15800 cm²
Sterilization Option(s)
Suitable for Autoclave or SIP
See All Attributes
510 Items

Description

High-performance Pall Ultipor III filters feature sophisticated design technology, including a unique patented helical wrap pleat support system and composite element structure offering unparalleled strength, outstanding performance and exceptional service life. These lube and hydraulic filters, used in applications such as turbine hydraulic system filters are a cost-effective and superior solution compared to traditional filter elements.

 

The Ultipor III filter media features a unique tapered pore design, that can reduce operating costs while offering maximum particle retention. This tapered pore design allows the coarser upstream surface to act as a prefilter that traps larger particles. The finer downstream pores then effectively capture critical clearance-sized particles.

 

Pall Ultipor III Filters - Features:

  • An outer helical wrap tightly bonded to each pleat for uniform pleat spacing minimizes pleat flexing and possible media damage, even under severe conditions such as cold start, high viscosity, or pressure surge. This also provides reliability, consistency, rigidity and resistance to extreme operating conditions.
  • Proprietary polymeric upstream and downstream support layers with built-in flow channels prevent media blind-off. This results in lower maintenance costs and extended element life.
  • Filter media made using inert, inorganic fibers bonded into a tapered pored structure ensure high particle removal efficiency, maximum dirt holding capacity, consistent filter performance and extended service life.
  • Coreless versions of the element are lightweight (60% lighter than traditional designs), crushable, and incinerable.
  • The element structure includes O-ring seals, corrosion resistant end caps and a rugged metal inner core. This product reduces disposal and maintenance costs.

 

Coreless Ultipor® III Filter Elements:

Pall Coreless Ultipor® III filter elements offer the advanced performance of Ultipor® III filter elements in a metal-free package. and feature a helical outer wrap, high strength upstream and downstream support, reinforced polymer end caps, and Ultipor® III filter medium. However, these do not include an internal core, since the core is a part of the filter housing. These high-quality filter elements provide consistent filtering, extended service life, and reduce maintenance costs through waste minimization. They are incinerable, crushable, and lightweight. Most existing Pall housings can be upgraded to coreless technology on-site.

 

Why choose Pall Ultipor III filter elements?

Pall Ultipor III filter elements feature superior and sophisticated design technology:

  • Patented helical wrap pleat support system for unparalleled strength and excellent performance consistency
  • A composite element structure that provides maximum dirt holding capacity
  • Proprietary upstream and downstream support layers for lower maintenance costs and extended element life
Product Highlights
 
  • Beta x(c) >= 1000 rating to ensure critical particle control for rapid flushing and clean up
  • The outer helical wrap pleat offers resistance to severe operating conditions, reliability and consistent filter performance
  • Elements are validated to the widest range of international performance standards
  • Coreless filter elements are incinerable, crushable, lightweight, and simple retrofit

Document

Ultipor III Document

  • Ultipor III Brochure

    Select Language :
    English

Specifications

  • Standard Filter Element Hardware: Corrosion-protected carbon steel, caps and core
  • Filter grade rating: Beta x(c) >= 1000 rating per ISO16889

Standard Elements Beta ratio = 1000 at 2.5, 5, 7, 12 and 22 µm(c)

Dirt-Fuse Elements Beta ratio = 1000 at 5 and 15 µm(c)

  • Element Collapse Pressure Rating: (ISO 2941)

 

  • Standard Elements:
    • Pressure Line Filters: 290 psid (20 bar)
    • Return Line Filters: 150 psid (10 bar)
    • 8310 Series Filters: 100 psid (7 bar)

Spin-Ons: 100 psid (7 bar)

  • Dirt-Fuse Elements:
    • 3000 psid (207 bar)
    • 9606 Series - 600 psid (41 bar)

Coreless Elements: 50 psid (10 bar)

 

  • Flow Compatibility (ISO 2943):

Compatible with petroleum oils, water glycols, water-oil emulsions and high water content fluids. Fluorocarbon seals available for industrial phosphate esters, diesters and specified synthetics.

  • Flow Fatigue (ISO 3724): 

Contact factory; composite element structure incorporates upstream and downstream medium support to achieve maximum fatigue cycle life.

  • Fabrication Integrity (ISO 2942)

Fabrication integrity is verified and assured during the manufacturing process by numerous evaluations and inspections, including bubble point testing.

  • Flow vs. Pressure Drop (ISO 3968)

Flow vs. Pressure drop data (psid/gpm) is listed with each filter series. See the appropriate filter series page.

  • Temperature Range:
    • Nitrile Seals: --45°F (-43°C) to +225°F (107°C)
    • Fluorocarbon Seals: -20°F (-29°C) to +250°F (120°C)

Note: maximum 140®F (-60®C) in water-based fluids

Applications

Industrial Applications

With state-of-the-art design technology, Pall Ultipor® III filter elements are a perfect solution for applications including:

 

Turbine Lubrication, Liquid Fuel Treatment, Turbine Lube & Hydraulics, Diesel Generator, Control Fluids, Wind Turbine, Hydroelectric Plants, Auto LOH for Stamping, Auto LOH-Filling Lines, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Equipment Lube Oil - on and off-board, Heavy, medium and light hydraulic, Heavy, medium and light lubrication, Coolants / Bearing Lubrication, Drives Gear Box + Roll Housing, Forging / Extrusion, Gear Box / Bearing, Gear Box / Morgoil, Material Directional Control, Material Handling

FAQs

1. How are Pall’s Coreless Ultipor® III filter elements different from the traditional Ultipor® III filter elements?

Unlike the Ultipor® III filter elements, Pall’s Coreless Ultipor® III filter elements do not include an internal core, since the core is a part of the filter housing.

 

Coreless Ultipor filter elements offer all the features of Ultipor® III filter elements in a metal-free package. These are designed with a helical outer wrap, high strength upstream and downstream support, reinforced polymer end caps, and Ultipor® III filter medium.

 

2. How are Pall Coreless Ultipor® III filter elements incinerable and crushable?

Pall Coreless Ultipor® III elements are incinerable because they are manufactured without metal components. Reinforced polymer end caps and filter support add BTU value in waste-to-energy facilities.

 

With the elimination of a core, Pall Coreless Ultipor® III elements are crushable. Elements can be folded to easily fit into drum packing equipment.

 

3. What is the “helical wrap” pleat support system?

The “helical wrap” pleat support system involves an outer helical wrap tightly bonded to each pleat to maintain uniform pleat spacing, and reliable and consistent performance. This minimizes pleat flexing and resists possible media damage, even under extreme operating conditions such as cold start or pressure surge.

 

4. What is the beta ratio of Pall Ultipor® III filters?

Standard Elements Beta ratio = 1000 at 2.5, 5, 7, 12 and 22 µm(c)

Dirt-Fuse Elements Beta ratio = 1000 at 5 and 15 µm(c)

 

5. Are Pall’s Coreless Ultipor® III filter elements environment friendly?

Yes, Pall’s Ultipor® III filter elements are environment friendly and designed to reduce disposal and maintenance costs.