Clean, aerosol-free gas is critical to equipment reliability and the economic efficiency of gas processing, petroleum refining, and chemical processing applications. Pall SepraSol™ liquid/gas coalescers remove liquids and solids from contaminated gases with high efficiency and reduce operating and maintenance costs.
SepraSol™ liquid/gas coalescers come with the patented oleophobic/hydrophobic treatment that lowers the medium's surface energy and promotes rapid drainage of the coalesced liquids. It enhances the capacity for liquid challenges and results in improved performance allowing for smaller systems, lower pressure drop, and improved ability to recover from liquid slugs.
Pall’s SepraSol liquid/gas coalescers eliminate virtually all solids and liquids in a gas stream. Downstream liquid levels are as low as 0.003 ppmw1, and the solids removal rating is 0.3 micron (μm) (99.99% efficiency)2
1 Test conditions used to measure efficiency area are as follows:
Flow rate: 900 SCF/minute per 30 in. element at 37.8°C (100°F) and 6.9 bar (100 psig)
Liquid inlet: 50 ppmw oil
2 Per sodium chloride test
Why choose Pall SepraSol™ Coalescers?
- More rapid liquid drainage
- Lower saturated pressure drop
- Faster recovery from liquid slugs
- Reduced capital and operating costs
- Improved product quality and consistency
- Minimized vessel diameter due to fewer restrictions on annular velocity
- Fewer element changeouts needed
- High solids removal efficiency
- Reduced liquid losses
- Optimum protection of downstream equipment
Additional Features of the Pall SepraSol Liquid/Gas Coalescing Filter